97
edits
Changes
Jump to navigation
Jump to search
Technics Hummer V Sputter Coater (view source)
Revision as of 16:39, 10 July 2013
, 16:39, 10 July 2013Created page with 'Category:Science {{Template:EquipmentPage |owner = PS:One |certification=yes |hackable = NO |model = Hummer V |serial = HUV 62735 |arrived = 3/23/2013 |doesitwork = WORKING …'
[[Category:Science]]
{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = Hummer V
|serial = HUV 62735
|arrived = 3/23/2013
|doesitwork = WORKING
|contact = Ryan Pierce
|where = Across from Woodshop
|value = $5,000.00
}}
==Configuration==
* Standard sputter coater
* Carbon arc attachment for carbon deposition
==Status==
* Requires argon for operation. Preferably high purity argon.
* Power cord is scary and needs to be replaced.
* Gas flow rate meter has a small leak, needs a new gasket.
* Initial tests with welding argon showed that it worked and was sputtering metal, however maintaining a plasma seemed to use a lot of current. The former operator suggested pulsing it to burn any oxygen in the chamber out. The manufacturer suggested a short that could be remedied by a good cleaning, which was performed.
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Ryan Pierce
|Ryan Pierce
|-
|}
==Documentation==
Manual scans for the sputter coater are available, as is a manual for a similar but not identical model of the carbon arc deposition system. A location to drop them is needed.
==Maintenance Log==
{| class="wikitable" border="1"
! Date
! Maintainer
! Description
|-
|4/?/2013
|Steve Finkelman
|Full cleaning of chamber.
|-
|}
{{Template:EquipmentPage
|owner = PS:One
|certification=yes
|hackable = NO
|model = Hummer V
|serial = HUV 62735
|arrived = 3/23/2013
|doesitwork = WORKING
|contact = Ryan Pierce
|where = Across from Woodshop
|value = $5,000.00
}}
==Configuration==
* Standard sputter coater
* Carbon arc attachment for carbon deposition
==Status==
* Requires argon for operation. Preferably high purity argon.
* Power cord is scary and needs to be replaced.
* Gas flow rate meter has a small leak, needs a new gasket.
* Initial tests with welding argon showed that it worked and was sputtering metal, however maintaining a plasma seemed to use a lot of current. The former operator suggested pulsing it to burn any oxygen in the chamber out. The manufacturer suggested a short that could be remedied by a good cleaning, which was performed.
{| class="wikitable" border="1"
! Qualified Member
! Trained By
|-
|Ryan Pierce
|Ryan Pierce
|-
|}
==Documentation==
Manual scans for the sputter coater are available, as is a manual for a similar but not identical model of the carbon arc deposition system. A location to drop them is needed.
==Maintenance Log==
{| class="wikitable" border="1"
! Date
! Maintainer
! Description
|-
|4/?/2013
|Steve Finkelman
|Full cleaning of chamber.
|-
|}