Cubify Sense 3d Scanner

From Pumping Station: One Wiki
Jump to: navigation, search


Cubify Sense 3d Scanner
Sense 3d Scanner.jpeg
Owner/Loaner PS:One
Serial Number 1405210468
Make/Model Sense
Arrival Date 2014
Usability yes
Contact CNC Area Host, or Will Garza, or Ray Doeksen
Where On top of CubePro Trio 3D printer
Authorization Needed no
Hackable no
Estimated Value $400
Host Area CNC


Cubify Sense 3d Scanner Area: CNC https://wiki.pumpingstationone.org/Cubify_Sense_3d_Scanner



The 3Dsystems account is registered to the info@ email and the password can be found in the ticketing system.

Getting Started with Sense Software

  1. Download the sense software to your laptop (PC/Mac) - link below
  2. Install the software
  3. When prompted input registration code (taped to the side of the scanner)
  4. Plug in the scanner into a USB port
  5. Let Windows install the drivers - when complete Device Manager should show a USB Device > PrimeSense > PrimeSense Carmine 1.09
  6. Follow on screen instructions to begin scanning

Software

Sense 3D Scanner (native)

ReconstructMe

Skanect


Sense 3d Scanner Location

Troubleshooting

  • The scanner doesn't light up or tell you that it's on - except for a small internal red LED.
  • The right and left side snap on and can pop off if you need to get inside.
  • The cable feels loose but strain relief is internal to the device.

Documentation

Sense 3D Scanner activation page

File:Sense userguide mac.pdf

File:Sense userguide pc.pdf