Hypertherm Powermax 45 Plasma Cutter

From Pumping Station: One Wiki
Jump to: navigation, search


Hypertherm Powermax 45 Plasma Cutter
Owner/Loaner PS:One
Serial Number N/A
Make/Model Hypertherm Powermax 45
Arrival Date Yes
Usability yes
Contact Ron Olson
Where Hot Metals
Authorization Needed yes
Hackable no
Estimated Value $2000
Host Area Hot Metals


Hypertherm Powermax 45 Plasma Cutter Area: Hot Metals https://wiki.pumpingstationone.org/Hypertherm_Powermax_45_Plasma_Cutter



NOTE: This machine is used by the CNC Plasma Cutter and is no longer available for hand-held use. Please use the Miller Spectrum 2050 for hand-held plasma use. Authorization is required; users authorized on the Hypertherm are authorized to use the Miller.

Manual: File:Hyperthem-45.pdf

List of Currently Authorized Users

Qualified Member Trained By Date
Bart Dring Owner
Everett Wilson Bart
Simon Cygielski Tom
Ryan Pierce Jabu Dawdu
Allen Zalsman Simon Cygielski
Scott Anamizu Simon Cygielski
Doorman Dave Jabu Dawdu
Ron Olson Tom Judge
Ray Doeksen Ron Olson
Jeremy Bloyd-Peshkin Bart
David Srebro Ron Olson
Michael Skilton Ron Olson
Tom Forajter Simon Cygielski
Raj Perera Ron Olson
Lauren Svedman Ron Olson
Andrew Camardella Tom Judge
Keon Turner Ron Olson
Jim Baker Lauren Svedman
Justin Conroy Ron Olson
Matthew Kim Chris Iacullo
Andrew Vaughan Chris Iacullo 5/11/17
Andrew Wingate Tom 7/6/17
Miriam Stevens Chris Iacullo 7/27/17
Jacob Snyder Daron Wooding 9/16/17
Wayne Hendryx Chris Iacullo 4/11/18
Matt Maggio Chris Iacullo 5/11/18
Nick Prorok Ron Olson 6/09/18
Bryan Gleason Ron Olson 8/5/18
Aaron Carlock Ron Olson 8/5/18
Will Spears Chris Iacullo 9/12/18
Ryan Treacy Chris Iacullo 9/22/18