Miller Dynasty 280DX

From Pumping Station One
Jump to navigation Jump to search


Miller Dynasty 280DX
Dynasy280dx.jpg
Owner/Loaner PS:One
Serial Number MF330991L
Make/Model Miller Dynasty 280DX
Arrival Date September, 2015
Usability yes
Contact Ron Olson
Where Hot Metals
Authorization Needed yes
Hackable no
Estimated Value $6800
Host Area Hot Metals


Miller Dynasty 280DX Area: Hot Metals https://wiki.pumpingstationone.org/wiki/Miller_Dynasty_280DX



Description

  • TIG Welder
  • The Dynasty 280 Series is a powerful combination of capability and portability. Weighing only 52 pounds, it can weld up to 3/8" thick material. The AC/DC TIG/Stick power sources feature an energy-efficient inverter design and Auto-Line™ technology.

Status

Works!

Authorization

Ask the Hot Metals rep at Hot Metals Office Hours. See the PS1 calendar for office hours.

Official Information

Torch Parts

As of early 2017, torch parts were considered to be consumables that were not going to be readily replenished by the area host due to abused and lost parts. As of June 2017, there were not enough torch parts to fully assemble a torch in either storage location (the clear divider in the Hot Metals tool cart, the yellow/black toolbox in the Hot Metals storage cabinet). The main part we seem to be missing are the gas lenses.

If you'd like to purchase your own torch parts our torch handle is a W-280. Additional parts can be found on page 3 of this PDF.

Parts can be found on Amazon.com for about $11. This kit of parts appears to fit well and can fully assemble 2 torch heads.

Manual

Manual for the 280DX on Miller Electric's site

Glossy

Dynasty 280DX Information

Reference Material