Olpc Keyboard Replacement

From Pumping Station One
(Redirected from Olpc keyboard replacement)
Jump to navigation Jump to search

Concept

The idea is to replace the Olpc's fumbly membrane keyboard with something more apt for touch typing. This Project is Based on the two part Instructable:

   Installing a USB Keyboard into an OLPC XO Laptop, Phase I 
   http://www.instructables.com/id/S62PQCZFCA43JDN/
   Finishing the Job: Installing a USB Keyboard into an OLPC XO Laptop, Phase II 
   http://www.instructables.com/id/Finishing-the-Job-Installing-a-USB-Keyboard-into-/


Members

Eric Hanley

Ingredients

Part 1. [1]

1. A new keyboard (see step 1)
2. Dremel tool or equivalent in sweat and pain
3. A jeweler's large phillips screwdriver, or one of those double-ended freebies they used to give away at IT-related conventions
4. Lots of cellophane tape (or hundreds of tiny helpers who don't mind being sealed inside your XO forever)
5. A desoldering iron (optional)
6. An XO laptop from OLPC, preferably one that has a keyboard problem.

Part 2.[2]

1. A jeweler's large phillips screwdriver (hopefully you haven't lost yours since Phase I)
2. The needliest needle-nosed pliers you can find
3. A pair of wire cutters or very small tin snips
4. A wire stripper set one notch below "angel hair"
5. A pair of scissors
6. A multimeter or a battery soldered to two wires and an LED, for continuity testing
7. One piece of cellophane tape (sorry cello fans)
8. A soldering iron
9. Solder (preferably lead-free)
10. Something to block the USB port your new keyboard will now permanently occupy, or a good memory for which port never, ever to use again
11. An OLPC XO laptop, preferably one that has an unsightly USB cable hanging out the back

Directions

http://www.instructables.com/id/S62PQCZFCA43JDN/

http://www.instructables.com/id/Finishing-the-Job-Installing-a-USB-Keyboard-into-/