Swag Heavy Duty Break
Jump to navigation
Jump to search
| File:None | |
| Owner/Loaner | Tom Judge |
|---|---|
| Serial Number | N/A |
| Make/Model | SWAG Offroad HD Break |
| Arrival Date | Yes |
| Usability | yes |
| Contact | Tom Judge |
| Where | Cold Metals Area |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $400 |
| Host Area | {{{hostarea}}} |
This tool is for use in the central machinery 20 ton H-Frame press.
There are 2 sets of dies, the standard dies and a set of gooseneck dies.
Max. Bending Capacity 1/2" plate
Max Bending Radius (deg.) 110
Max Bending Width 19"
It Is capable of bending mild steel in the following width and thickness.
- 19" = Full bending width of the bottom die on anything 3/16" or thinner.
- 15" in 1/4"
- 13" in 5/16"
- 11" in 3/8"
- 6" in 1/2"
Gooseneck dies
These dies are for bending shallow pans or forming complex "U" bends, please use the regular dies for all standard bends.
THE MAXIMUM THICKNESS OF MATERIAL TO BE BENT WITH THE GOOSENECK DIES IS 1/4"
Using the gooseneck dies you will be able to bend U shaped pieces that have maximum leg "A" that is 2.0" long and a minimum width "B" of 2.0" wide.
Authorized Users
| Qualified Member | Trained By |
|---|---|
| Tom Judge | Owner |
| Dean Anderson | Area Host |