BOSS LS-3655 150w Laser Engraver
Jump to navigation
Jump to search
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | SERIAL NUMBER |
| Make/Model | BOSS LS-3655 150w |
| Arrival Date | TBD |
| Usability | yes |
| Contact | CNC Area Host |
| Where | CNC Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | Est $17,000 |
| Host Area | CNC |
About
The BOSS LS-3655 is an industrial CO2 laser engraver with a 36" x 55" bed, supporting over-sized material pass-thru on four sides and up to 7 inches of table depth.
Resources
The proprietary LaserWORKS software can be downloaded from BOSS here - https://www.bosslaser.com/laser-software/
Manuals for the BOSS laser and the LaserWORKS software are located here - https://www.bosslaser.com/download-manuals-guides/
BOSS test files are available here - https://www.bosslaser.com/laser-test-files
Status - TBD
This page will be filled out further as information becomes available.
The laser is currently not setup in the space, and authorizations are not being held at this time.