Line 46: |
Line 46: |
| * ShopBot Auth - to create molds out of MDF with the CNC. | | * ShopBot Auth - to create molds out of MDF with the CNC. |
| * Woodshop Auth | | * Woodshop Auth |
− | ** [https://wiki.pumpingstationone.org/Rockwell_14_inch_bandsaw Bandsaw] - To cut flashing (excess material) from thick finished parts with Vertical Bandsaw. | + | ** [https://wiki.pumpingstationone.org/Rockwell_14_inch_bandsaw Band saw] - To cut flashing (excess material) from thick finished parts with Vertical Band saw. |
| ** [https://wiki.pumpingstationone.org/Porter_Cable_Panel_Saw Panel Saw] - to cut sheets of plastic to correct frame size. | | ** [https://wiki.pumpingstationone.org/Porter_Cable_Panel_Saw Panel Saw] - to cut sheets of plastic to correct frame size. |
| * 3D Printer Auth | | * 3D Printer Auth |
Line 61: |
Line 61: |
| |- | | |- |
| | | | | |
− | # Insert sheet of material into Frame
| + | ''' Power On Procedure ''' |
− | # Close the frame latch to the secure the material
| |
− | # Push bar forward to close frame clamps and secure overall frame.
| |
− | # Secure Buck/Form/Mould to Vacuum table
| |
− | # Check seals around material and mold
| |
− | |-
| |
− | |
| |
| # Turn on Wall Power | | # Turn on Wall Power |
| |[[File:Bvf main power.jpg|300px]] | | |[[File:Bvf main power.jpg|300px]] |
Line 74: |
Line 68: |
| # Turn on Machine Power | | # Turn on Machine Power |
| |[[File:Bvf machine power.jpg|300px]] | | |[[File:Bvf machine power.jpg|300px]] |
| + | |- |
| + | | |
| + | # Insert sheet of material into Frame |
| + | # Close the frame latch to the secure the material |
| + | # Push bar forward to close frame clamps and secure overall frame. |
| + | # Secure Buck/Form/Mould to Vacuum table |
| + | # Check seals around material and mold |
| |- | | |- |
| | | | | |
Line 119: |
Line 120: |
| '''Cleanup Procedure''' | | '''Cleanup Procedure''' |
| # Cleanup any unused material or scrap. | | # Cleanup any unused material or scrap. |
− | # Throw away failed part pulls in dumpster. Do not leave in Hot Metals area. | + | # Throw away failed part pulls in dumpster. '''Do not leave in Hot Metals area.''' |
| | | |
| | | |
Line 161: |
Line 162: |
| | | |
| ===Materials for Buck/Form=== | | ===Materials for Buck/Form=== |
− | These are an exmaple of some materials that can be used for molding. The material needs to be heat resistant. It should also have a flat base for stability on the platform. | + | These are an example of some materials that can be used for molding. The material needs to be heat resistant. It should also have a flat base for stability on the platform. |
| | | |
| * [https://www.amazon.com/SELECTION-5lb-Plaster-of-Paris/dp/B077MD57S3/ Plaster of Paris] | | * [https://www.amazon.com/SELECTION-5lb-Plaster-of-Paris/dp/B077MD57S3/ Plaster of Paris] |
| * [https://www.alumilite.com/store/p/1055-Vac-Master-50.aspx Vac-Master Resin with Aluminum] | | * [https://www.alumilite.com/store/p/1055-Vac-Master-50.aspx Vac-Master Resin with Aluminum] |
− | * MDF ( Shaped on CNC or pre-shaped ) | + | * MDF Form ( Shaped by Shopbot CNC or purchased pre-shaped ) |
| * Aluminum/Steel Part | | * Aluminum/Steel Part |
| | | |
| ===Materials for Forming=== | | ===Materials for Forming=== |
− | Information on safe thermoformable materials in sheets. | + | Information on safe thermo-formable materials in sheets. |
| | | |
| Material Selection Guide - https://www.toolcraft.co.uk/vacuum-forming/advice/vacuum-forming-help-material-selection-guide.htm | | Material Selection Guide - https://www.toolcraft.co.uk/vacuum-forming/advice/vacuum-forming-help-material-selection-guide.htm |