577
edits
Changes
Jump to navigation
Jump to search
Line 11:
Line 11: − + Line 20:
Line 20: − + − + Line 54:
Line 54: − + + + + + Line 63:
Line 67: + Line 70:
Line 75: − + − + + + + + + + + + − + − + + + + + + − + − + − |[[File:Bvf_frame_clamps.jpg|300px]]+ + + + − + − # Check seals around material and mold+ − + − + Line 96:
Line 117: − + − + − + − + − | − [[File:Bvf_pnuematic_hose_01.jpg|300px]] − [[File:Bvf_pnuematic_hose_02.jpg|300px]] − |- − | − # Turn on Heating Element − + + − + − + Line 124:
Line 140: − + + + Line 130:
Line 148: − + − + + − + − + Line 142:
Line 161: − + − + + Line 149:
Line 169: − + − + − + Line 160:
Line 180: − + + + + + − [[File:Bvf machine power.jpg|300px]] Line 183:
Line 206: − * '''HOT SURFACE''' - Metal Frame holding material and handles will be hot. '''Wear Gloves''' during operation. [[File:Hot sm.png|150px]]+ − * [[File:Fire sm.png|150px]] '''FIRE''' - Material may catch fire while heater is left on. '''Do not leave unattended'''.+ − * '''CRUSHING''' - Make certain there is nothing obstructing the platform, before pulling the pneumatic lever raising the mold to frame. '''Clear Obstructions'''. [[File:Crush sm.png|150px]]+ − * [[File:Shock sm.png|150px]] '''ELECTRIC SHOCK''' - High Voltage machinery (3 Phase Power) required to run motors and heating elements. Make certain cabling is secure and undamaged before operating. '''Check Cabling'''.+ − + + + + + + + + + + + + + + + + + Line 227:
Line 266: + + + + + + + Line 239:
Line 285: − + + + + + Line 285:
Line 335: − + Line 300:
Line 350: − + − − == List of Currently Authorized Users == − {| class="wikitable" border="2" − ! Authorized Member − ! Authorized By − | Date − |- − |Andrew Camardella − |Self − |Sometime − |- − | Dan Sharp − | Andrew Camardella − | 1/12/19 − |- − |Greg "Nerobro" Teiber − |Andrew Camardella − |1/12/19 − |- − |Adam Stein − |Andrew Camardella − |1/12/19 − |- − |Mariano Muñoz − |Andrew Camardella − |11/22/18 − |} − − [[Category: Hot Metals]]
Belovac Vacuum Forming Machine (view source)
Revision as of 10:08, 7 January 2021
, 10:08, 7 January 2021no edit summary
|contact = [[User:Rtystgeeke]]
|contact = [[User:Rtystgeeke]]
|value = tbd
|value = tbd
|image = Belovac Vacuum Former Main.jpg|300px
|image = Belovac_Vacuum_Former_Main.jpg|300px
}}
}}
=== How to Get Authorized ===
=== How to Get Authorized ===
'''Authorization for this machine is on demand'''. Please send a request on the Google Group to see when an Authorizer (below) is available.
'''Authorization for this machine is on demand and viral'''. Please make a request on the Google Group to see when an Authorized member (below) is available and coordinate an authorization.
Please review the information on this page, in particular the Safety section.
Please review the information on this page, in particular the Safety section before meeting.
Please bring your own materials, as there is no guarantee there will be any available. A few sheets of thin 12in x 12in ABS/HIPS would be ideal.
Please bring your own materials, as there is no guarantee there will be any available. A few sheets of thin 12in x 12in ABS/HIPS would be ideal.
The process consists essentially of inserting a thermoplastic sheet in a cold state into the clamp area, heating it to the desired temperature with the heating elements, and then raising the buck/form/mould from below. The trapped air is evacuated with the assistance of a vacuum system. Once cooled, the platform is lowered to release the formed plastic part from the buck/form/mould.
The process consists essentially of inserting a thermoplastic sheet in a cold state into the clamp area, heating it to the desired temperature with the heating elements, and then raising the buck/form/mould from below. The trapped air is evacuated with the assistance of a vacuum system. Once cooled, the platform is lowered to release the formed plastic part from the buck/form/mould.
The following instructions are an initial release of how to run the machine. Please provide feedback or feel free to make edits.
The following instructions are an initial release of how to run the machine.
Please review '''Safety''' section below the Instructions.
Please provide feedback or feel free to make edits.
{| class="wikitable" border="2"
{| class="wikitable" border="2"
''' Power On Procedure '''
''' Power On Procedure '''
# Turn on Wall Power
# Turn on Wall Power
Note: Check that plug below panel is connected. It may be disconnected.
|[[File:Bvf main power.jpg|300px]]
|[[File:Bvf main power.jpg|300px]]
|-
|-
|-
|-
|
|
# Insert sheet of material into Frame
# Push bar forward to close frame clamps and secure overall frame.
|[[File:Bvf_frame_open_small.jpg|300px]]
Note: Do not use as handle when pushing/pulling frame into position.
|[[File:Bvf_frame_clamps.jpg|300px]]
|-
|
* Select desired Valve configuration on bed/platen/platform.
# Both Valves closed for 12inx12in frame
# Left Valve Closed and Right Valve Open for 24inx24in frame
# Both Valves Open for 24inx48in frame
|[[File:Bvf_platform_valves.jpg|300px]]
|-
|-
|
|
# Close the frame latch to the secure the material
# Connect Pneumatic Hose. This allows one to raise/lower the platform.
|[[File:Bvf_frame_latch_small.jpg|310px]]
Note: It can be borrowed from the CNC Plasma Cutter, if not in use.
Note: The main valve with yellow handle, behind the CNC Plasma cutter, above the large tank, may be closed if there is no air.
|
[[File:Bvf_pnuematic_hose_01.jpg|300px]]
[[File:Bvf_pnuematic_hose_02.jpg|300px]]
|-
|-
|
|
# Push bar forward to close frame clamps and secure overall frame.
# Secure Buck/Form/Mould to Vacuum table. If it is heavy enough and does not stick, it may not need to be secured.
Note: Do not use as handle when pushing/pulling frame into position.
Note: it is recommended to have the mold be a bit taller than desired part, to allow space for cut separation.
# Check seals around material and mold.
Note: If material is not thick enough, it may slip out of the frame.
# Raise part way to make certain mold lines up with frame.
Note: It is a 3 position pneumatic valve. Up position raises platform. Center position, holds platform at current position. Down position, lowers platform.
|-
|-
|
|
# Secure Buck/Form/Mould to Vacuum table
# Insert sheet of material into Frame.
|[[File:Bvf_frame_open_small.jpg|300px]]
|-
|-
|
|
# Select desired Valve configuration on bed/platen/platform.
# Close the frame latch to the secure the material.
|[[File:Bvf_platform_valves.jpg|300px]]
|[[File:Bvf_frame_latch_small.jpg|310px]]
|-
|-
|
|
|-
|-
|
|
# Select Duty Cycle for Heating Elements.
# Select '''On''' Percentage Duty Cycle (0%-100%) for Heating Elements. It is on a 15 second timer.
Note: This controls the cycle time of the heating elements being On, then Off.
Note: This controls the cycle time of the heating elements being On (at dial), then Off (top of timer).
|[[File:Bvf_heat_duty_cycle.jpg|300px]]
|[[File:Bvf_heat_duty_cycle.jpg|300px]]
|-
|-
|
|
# Connect Pneumatic Hose. This allows one to raise/lower the platform.
# Turn on Heating Element
Note: It can be borrowed from the CNC Plasma Cutter, if not in use.
Note: You will see the Timer begin to rotate counter clockwise and audibly hear the contactors/relays energize.
|[[File:Bvf control panel.jpeg|300px]]
|[[File:Bvf control panel.jpeg|300px]]
|-
|-
|
|
# Move material frame into heater
# Move material frame into heater by pushing on front of slide.
Note: do not use frame clamp bar as handle.
|[[File:Bvf_heat_1.jpg|300px]]
|[[File:Bvf_heat_1.jpg|300px]]
|-
|-
|
|
# Close Vacuum Valve
# Close Vacuum Valve (facing valve, rotate clockwise, with handle position pointing to the left at final position.)
# Turn on pump, to begin to build vacuum
# Turn on pump, to begin to build vacuum.
|
|
[[File:Bvf_vacuum_valve.jpg|300px]]
[[File:Bvf_vacuum_valve.jpg|300px]]
|
|
# Visually check if heating element is on and if material is warming
# Visually check if heating element is on and if material is warming
# Visually check if material is sagging and ready
Note: The heating elements will visibly glow red.
# Visually check if material is sagging and ready.
Note: It will visibly sag and look like a dome.
|
|
[[File:Bvf heat 1.jpg|300px]]
[[File:Bvf heat 1.jpg|300px]]
|-
|-
|
|
# Pull Material frame forward (towards front/away from heaters)
# Pull Material frame forward (towards front/away from heaters) completely forward until it stops.
# Inspect Plastic is ready (sufficiently heated/soft)
Note: Do not pull on frame clamp bar. It will open all 3 clamps if pulled on.
# Inspect Plastic is ready (sufficiently heated/soft).
|[[File:Bvf_frame_forward.jpg|300px]]
|[[File:Bvf_frame_forward.jpg|300px]]
|-
|-
|
|
# Make certain area is clear before raising bed/platen/platform
# Make certain area is clear before raising bed/platen/platform.
# push lever down to raise vacuum bed/platen/platform
# push lever up to raise vacuum bed/platen/platform.
|
|
[[File:Bvf_platform.jpg|300px]]
[[File:Bvf_platform.jpg|300px]]
|-
|-
|
|
# Open Vacuum Valve
# Open Vacuum Valve (rotate counter clockwise, with handle position pointing down at final position).
# Monitor pull of material over mold
# You should see the plastic part quickly take the shape of the mold.
# Monitor pull of material over mold.
|
|
[[File:Bvf_vacuum_valve.jpg|300px]]
[[File:Bvf_vacuum_valve.jpg|300px]]
|-
|-
|
|
# Close Vacuum Valve to Turn off Vacuum
# Close Vacuum Valve to Turn off Vacuum, when part is ready.
# Allow part part to sufficient time cool. This is dependent on the thickness of your material.
# Allow part sufficient time to cool, before separation. This time frame is dependent on the thickness of your material.
# Push bed/platen/platform lever Up to lower down and pull away from part.
# Push bed/platen/platform lever down to lower platform and pull mold away from formed part.
|
|
[[File:Bvf_vacuum_valve.jpg|300px]]
[[File:Bvf_vacuum_valve.jpg|300px]]
# On Control panel, Turn Heater switch to Off position.
# On Control panel, Turn Heater switch to Off position.
# On Control panel, Turn Vacuum switch to Off position.
# On Control panel, Turn Vacuum switch to Off position.
# Disconnect pneumatic hose. Return to CNC Plasma Cutter.
# Open Vacuum Valve (rotate counter clockwise, with handle pointing down), to release any remaining vacuum in the tank.
# Push platform lever down, to release air pressure from pneumatic hose. (Hose will momentarily whip around at next step if air is not released)
# Disconnect pneumatic hose. Return to CNC Plasma Cutter.
# Turn off machine power.
# Turn off machine power.
# Turn off Main Wall power.
# Turn off Main Wall power.
# Make certain material frames are closed and not left open. (where they can snap shut accidentally)
|
|
[[File:Bvf machine power.jpg|300px]]
[[File:Bvf main power.jpg|300px]]
[[File:Bvf main power.jpg|300px]]
|-
|-
|
|
===Warnings===
===Warnings===
{| class="wikitable" border="2"
! Danger/Warning
! Description
! Mitigation
|-
|[[File:Hot sm.png|150px]]
|'''HOT SURFACE''' - Metal Frame holding material and handles will be hot.
|'''Wear Gloves''' during operation
|-
|[[File:Fire sm.png|150px]]
|'''FIRE''' - Material may catch fire while heater is left on.
|'''DO NOT Leave Unattended'''
|-
|[[File:Crush sm.png|150px]]
|'''CRUSHING''' - Make certain there is nothing obstructing the platform, before pulling the pneumatic lever raising the mold to frame. Make certain steel material frames are not left open. They can fall forward, quickly snapping shut.
|'''Clear All Obstructions'''
|-
|[[File:Shock sm.png|150px]]
|'''ELECTRIC SHOCK''' - High Voltage machinery (3 Phase Power) required to run motors and heating elements. Visually check that power cabling is secure, grounded and undamaged before operating and touching metal enclosure.
|'''Check Cabling'''
|}
==Machine Information==
==Machine Information==
* Acrylonitrile Butadiene Styrene (ABS)
* Acrylonitrile Butadiene Styrene (ABS)
** [https://www.amazon.com/ABS-Plastic-Sheet-Thick-Thickness/dp/B004WP24XU/ Example 12inx12in ABS sheets]
** [https://www.amazon.com/ABS-Plastic-Sheet-Thick-Thickness/dp/B004WP24XU/ Example 12inx12in ABS sheets]
'''Plastics Distributors''' taken from [http://www.tk560.com/vactable4.html tk560.com]
Order full sheets 4'x8' and cut to desired size with panel saw.
*[http://www.professionalplastics.com/cgi-bin/pp.pl?pgm=co_disp&func=displ&strfnbr=3&prrfnbr=85378&sesent=0,0 ProfessionalPlastics.com]
*[http://www.indplastic.com/index.cfm?id=138046&fuseaction=browse&pageid=142 IndPlastic.com]
*[http://www.usplastic.com/catalog/default.asp USPlastic.com]
===Troubleshooting===
=== Trimming Part ===
* Depending on the thickness of the material, a band saw or box cuter can be used to trim excess flashing from the final part.
=== Troubleshooting ===
How long does it take to heat the plastic sheet?
How long does it take to heat the plastic sheet?
* More powerful Vacuum Pump
* More powerful Vacuum Pump
* Temperature Monitoring
* Temperature Monitoring
* Mount Control Panel Box to machine
* Mount Control Panel Box to machine ''DONE''
* Put on locking casters, or more permanent blocks/skid (machine is very heavy)
* Put on locking casters, or more permanent blocks/skid (machine is very heavy)
* make the platen stationary and the heater roll (complicated)
* make the platen stationary and the heater roll (complicated)
=== How to Become an Authorizer ===
=== How to Become an Authorizer ===
Get an ok from the area host. Successfully run an authorization supervised by an authorizer.
Get an ok from the area host. Successfully run an authorization supervised by an authorizer.