150
edits
Changes
Jump to navigation
Jump to search
Line 28:
Line 28: − + Line 279:
Line 279: − + − + − + + + +
Belovac Vacuum Forming Machine (view source)
Revision as of 19:36, 28 February 2019
, 19:36, 28 February 2019no edit summary
=== Current Status ===
=== Current Status ===
This machine is working but requires maintenance and improvements.
This machine is working but requires maintenance and improvements (see list below).
== Vacuum Forming Process ==
== Vacuum Forming Process ==
* Fix platen/frame rubber seals
* Fix platen/frame rubber seals
* Build basic test mold for demos and training. (PS1 Logo or Mask)
* Build basic test mold for demos and training. (PS1 Logo or Mask)
* Move Gauge before valve to measure vacuum
* Move vacuum gauge to before the valve, to measures the vacuum the pump is pulling (right now it's after the valve, so doesn't read anything useful)
* Larger Vacuum Tank
* Install Additional/Larger Vacuum Tank to the system for more capacity
* More powerful Vacuum Pump
* More powerful Vacuum Pump
* Temperature Monitoring
* Temperature Monitoring
* Attach Control Panel to machine
* Mount Control Panel Box to machine
* Put on locking casters, or more permanent blocks/skid (machine is very heavy)
* make the platen stationary and the heater roll (complicated)
* Reduce the footprint of the machine (complicated)
== Authorizers ==
== Authorizers ==