Difference between revisions of "Big Blasting Cabinet"
Jump to navigation
Jump to search
Tachoknight (talk | contribs) (→Media) |
Tachoknight (talk | contribs) |
||
Line 18: | Line 18: | ||
== Information == | == Information == | ||
− | The cabinet is located behind the curtain near the Temporary Project Area. | + | The cabinet is located behind the curtain near the Temporary Project Area. It acts as a barrier for welding station: two |
== Media == | == Media == |
Revision as of 15:53, 4 April 2019
Information
The cabinet is located behind the curtain near the Temporary Project Area. It acts as a barrier for welding station: two
Media
The media in the cabinet is pulverized glass beads, 100-150 grit. The part number is 3386K73 from McMaster-Carr
Do not change the media without prior approval from the Hot Metal Shop host!
Use
DO NOT POINT THE GUN AT THE GLASS!
- Ensure the vacuum is plugged into the switched outlet (top left of unit) before operating.
- Do not recycle blasting media. Only add fresh media to the hopper.
- Only use approved blasting media.
- Ensure both doors are fully secured before operation.
- Use a respirator while handling media or cleaning vacuum filter.
- Do not point gun at gloves. Use screen tray for parts too small to safely hold.
Gun Setup, Parts, and Troubleshooting
List of Currently Authorized Users
Qualified Member | Trained By | Date |
---|---|---|
Sam Paris | Ron Olson | 03/30/19 |
Jacob M. Dawson | Ron Olson | 03/30/19 |