Difference between revisions of "Boice Crane Drill Press"

From Pumping Station: One Wiki
Jump to: navigation, search
(List of Currently Authorized Users)
(List of Currently Authorized Users)
Line 97: Line 97:
|Todd Allen
|Todd Allen
|Dafe Hughes
|Dafe Hughes
|Todd Allen
|Todd Allen
Line 103: Line 104:
|Tom Judge
|Tom Judge
|Abel Greenwald
|Michael Patton

Revision as of 20:13, 15 December 2016

Boice Crane Drill Press
Boice crane.jpg
Owner/Loaner PS:One
Serial Number 23649
Make/Model Boice Crane 24103 24" Power Feed
Arrival Date January 2015
Usability yes
Contact Dean Anderson
Where Machine Shop
Authorization Needed yes
Hackable no
Estimated Value $600
Host Area {{{hostarea}}}

Boice Crane Drill Press Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Boice_Crane_Drill_Press


8 speed

Gear-head. No belts or Jacobs chuck to slip, which means there is a lot of torque.

Morse #3 taper spindle

Capacity, cast iron 1 1/4"

Drills to center 23"

approximate weight 600 pounds

motor HP 1.5 (high) 1.2 (low)

Spindle speeds (8) 84, ...

Auth/Use Notes

These notes are for reference after authorization by a person.

Only use drills and accessories with correct shank taper and tang

Work piece needs secure mounting due to spindle's high torque

No through hole (table designed for coolant), must use vise

No quill stop, must set table or head height to prevent drilling into table

Don't force gear selectors, hand turn spindle as needed to align gears

Gears reverse spindle, must turn power switch to appropriate side for correct spindle rotation direction

Power switch has two speeds to each side

Drill shanks must be firmly seated in taper

To remove drill, lower spindle to expose the slot in the quill, turn the spindle by hand until the quill slot lines up with the spindle slot, insert the #3 drift into the slot with the curved edge facing up, grasp drill, tap drift with hammer


Clean drill shanks

Mill pocketed vise jaw flat

More clamps matching table T-slots

Improve sketchy quill return mechanism

Adjustable quill stop

Coolant system




List of Currently Authorized Users

Qualified Member Trained By Date Trained
Dean Anderson Machine Shop Host Cred
Everett Wilson Dean Anderson
Tom Judd Dean Anderson
Todd Allen Dean Anderson 9/15/2015
Greg Kudlacz Todd Allen
Dafe Hughes Todd Allen
Connor Sullivan Tom Judge 1/22/16
Abel Greenwald Michael Patton