3
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: − + Line 5:
Line 5: − These are known settings successfully used for cutting.+ + + + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + + + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
no edit summary
The below is to help you figure out your settings for your cutting job. Please do not be creative with settings unless you know what you're doing, because you can easily set things on fire.
The below is to help you figure out your settings for your cutting job on the [[BOSS LS-3655 150w Laser Engraver|Boss Laser]]. Please do not be creative with settings unless you know what you're doing, because you can easily set things on fire.
==Test Cuts==
==Test Cuts==
==Known Settings==
==Known Settings==
Known, successfully used settings.
===Cutting===
{| class="wikitable"
{| class="wikitable"
|-
|-
! Material
! Material
! Thickness
! Speed (mm/second)
! Speed (mm/second)
! Power
! Power (%)
! Kerf
|-
| Acrylic
| 1/16"
| 50
| 50
|
|-
| Plywood
| 1/4"
| 25?
| 80
|
|-
| MDF Core Plywood (Owl Lumber)
| 0.177"
| 25
| 75
| 0.0184
|-
| ABS
| 1/8"
| 20
| 65
|
|-
| Balsa
| 1/16" medium density
| 150
| 10
|
|-
|-
| 1/4" Plywood
| Balsa
| 3/32" medium density
| 150
| 25
| 25
| 100 (95% actual)
|
|-
| Balsa
| 1/8" medium density
| 150
| 30
|
|-
| Cermark Engraving Brass
|
| 30
| 70
|
|-
| Masonite
| 1/8"
| 15
| 50
| 0.5mm
|-
| MDF
| 1/4"
| 7.5
| 70
| 0.6mm
|-
| Mylar sheet
| 7.5mil (190 micron)
| 30 to 150
| 10
|
|}
===Engraving===
{| class="wikitable"
|-
! Material
! Depth
! Speed (mm/second)
! Power (%)
|-
| Masonite
| 0.4mm
| 100
| 10
|-
| Masonite
| 1mm
| 100
| 15
|-
| Masonite
| 1.3mm
| 100
| 20
|-
| Masonite
| 1.6mm
| 100
| 25
|-
| Speedycarve (rubber)
| ~1mm
| 50
| 10
|}
|}