Boss Laser Settings

From Pumping Station: One Wiki
Revision as of 23:36, 31 March 2017 by Daddybird (talk | contribs) (Known Settings)
Jump to: navigation, search

The below is to help you figure out your settings for your cutting job. Please do not be creative with settings unless you know what you're doing, because you can easily set things on fire.

Test Cuts

There are several test cut pieces. These test various power/speed in a pie shape going from 10% to 100%. These are a good starting point.

Known Settings

These are known settings successfully used for cutting.

Material Speed (mm/second) Power
1/4" Plywood 25? 80