Boss Laser Settings
From Pumping Station One
The below is to help you figure out your settings for your cutting job. Please do not be creative with settings unless you know what you're doing, because you can easily set things on fire.
Test Cuts
There are several test cut pieces. These test various power/speed in a pie shape going from 10% to 100%. These are a good starting point.
Known Settings
These are known settings successfully used for cutting.
| Material | Speed (mm/second) | Power |
|---|---|---|
| 1/4" Plywood | 25? | 80 |
| 1/8" ABS | 20 | 65 |
| Cermark Engraving Brass | 30 | 70 |
