Difference between revisions of "Brother DCP-7065DN Printer"

From Pumping Station: One Wiki
Jump to: navigation, search
(Helpful Hint)
m (add to category)
Line 5: Line 5:
|hostarea=2D Printing
|where=2D Printing

Revision as of 12:46, 26 February 2019

Brother DCP-7065DN Printer
Owner/Loaner PS:One
Serial Number 3066558
Make/Model Brother DCP-7065DN
Arrival Date 2014-07-01
Usability yes
Contact {{{contact}}}
Where 2D Printing
Authorization Needed no
Hackable no
Estimated Value $180
Host Area 2D Printing

Brother DCP-7065DN Printer Area: 2D Printing https://wiki.pumpingstationone.org/Brother_DCP-7065DN_Printer


Network Location

Use a bonjour enabled service to locate the pritner

  • On OS X, bonjour is enabled by default. Adding the printer will download drivers from apple.
  • On Windows, install the brother drivers for the printer. The printer will then be discoverable.

MAC Address 30:05:5c:30:75:de

IP Address


From: http://www.brother-usa.com/MultiFunction/ModelDetail/4/DCP7065DN/supp#.U-K14mPp5VM

  • Toner Cartridges: TN450
  • We have a spare drum unit (DR420) in the safe. It doesn't need to be replaced nearly as often as toner does.

Helpful Hint

It appears that the size of images to be printed defaults to metric - a member has suggested this solution.

Comment: the size of things printed is going to depend on the printer driver, it isn't a metric or Imperial thing.

When I clicked on a BMP file, IrfanVew started. Select Print

   Width:  15.10
   Height: 10.10
    Look at the resulting image size on paper
    The cm/in should match the BMP size