Difference between revisions of "Category:CNC"

From Pumping Station: One Wiki
Jump to: navigation, search
m (Laser Engravers)
(Authorization/Certifications)
Line 77: Line 77:
 
== Authorization/Certifications ==
 
== Authorization/Certifications ==
  
Authorization for the ShopBot will appear as a Meetup event, and on the PS1 event calendar.  
+
Authorization for the ShopBot will appear as a Meetup event, and on the PS1 event calendar.
  
Authorization for other equipment varies, policy may be listed on the tool's own wiki page. Some authorization events may be listed as Meetup events, on the PS1 event calendar (which is mirrored on the PS1 web site "Events" page) or may be announced on the PS1 Google Group (generally the private one, not the public one).  
+
Authorization for other equipment varies, the policy may be listed on the tool's own wiki page. Some authorization events may be listed as Meetup events, Signup.com events, on the PS1 event calendar (which is mirrored on the PS1 web site "Events" page) or may be announced on the PS1 Google Group (generally the private one, not the public one).  
  
To be able to log in on the laser or ShopBot PCs you must have your member login account modified by a member who has admin privileges. Once you are authorized, you will use the same username and password you would use on any other PS1 computer.  
+
To be able to log in on the lasers or ShopBot PCs you must have your member login account modified by a member who has admin privileges. Once you are authorized, you will use the same username and password you would use on any other PS1 computer.
 +
 
 +
[https://signup.com/Group/497008409545908038/ SIGNUP.COM CNC PAGE]
  
 
[[Category:Hosted Areas]]
 
[[Category:Hosted Areas]]

Revision as of 14:32, 19 December 2017

Equipment-no-photo.jpg
CNC
Hosted Since:
Location: All over
Equipment: Category:CNC
Area Host Contact Details
Name: Ashish Jasani
Phone:
Email: cnc at pumpingstationone.org
Other Contact:
Office Hours: Mondays @ 8pm
Certifications:



Computer Numeric Control: computerized tools for manufacturing and crafting.

Rules

Clean Up

  • Please allot time for your project to clean up after yourselves. Throw away scrap, and store usable materials in the file cabinet.
  • Empty Laser Engraver catch trays.
  • Please return all tools from where you found it.
  • Empty the trash when it is full

Conserving Energy

  • Turn off the exhaust after a project. Do not cycle the exhaust rapidly.
  • Turn off the Lights and A/C at the end of the day.
  • Turn off 3D printers when prints are done.

Storage

  • There is absolutely no member storage in the CNC area. Please clean up all projects when you are done. Left over projects without any documentation will be thrown away.

Safety

Tools Available

3D Printing

3D Scanning

Laser Engravers

CNC Routers

Misc Equipment

Supplies

Supplies are generally not provided. There are some PS1-owned bits in the drawer for the ShopBot, but you may wish to purchase your own bits if you want to be confident that you'll have a good, sharp bit of the appropriate size for your project. If you break a shop-owned bit, please tell the area host and post a note to the wiki and Google group.

There is often some common-use filament available for the TAZ3, AO-100 or Replicator 3D printers, but you may also used your own if you want to be confident that you'll have enough high-quality filament for your project. Filament can be purchased at MicroCenter and other retailers for about $20 per spool. Filament can be purchased for the Cube printer for about $100 per cartridge.

All machines, including the vinyl cutter and large format printers, should have information about their consumables listed on their respective wiki page.

There is a donation box next to the Cube printer for filament; suggested donation for Cube filament is 30 cents per gram.

Authorization/Certifications

Authorization for the ShopBot will appear as a Meetup event, and on the PS1 event calendar.

Authorization for other equipment varies, the policy may be listed on the tool's own wiki page. Some authorization events may be listed as Meetup events, Signup.com events, on the PS1 event calendar (which is mirrored on the PS1 web site "Events" page) or may be announced on the PS1 Google Group (generally the private one, not the public one).

To be able to log in on the lasers or ShopBot PCs you must have your member login account modified by a member who has admin privileges. Once you are authorized, you will use the same username and password you would use on any other PS1 computer.

SIGNUP.COM CNC PAGE