Clausing Lathe

From Pumping Station: One Wiki
Revision as of 09:31, 17 December 2013 by Nerobro (talk | contribs) (Documentation and Training Materials)
Jump to: navigation, search

Clausing Lathe
Owner/Loaner Anna Yu
Serial Number ?
Make/Model 4900 Series
Arrival Date ?
Usability yes
Contact Anna Yu
Where Machine Shop
Authorization Needed yes
Hackable no
Estimated Value yes
Host Area {{{hostarea}}}

Clausing Lathe Anna Yu Area: {{{hostarea}}}


Cover the machine when not in use. Keep the cover off of the floor, and allow coolant to evaporate before covering again.

A resonance sets in when the variable frequency drive is set to around 50-65%.

A red dot indicates a setting that can only be changed when the lathe is off.


Contact Anna Yu for certification. Information is on the side of the lathe.

List of Currently Certified Users

Qualified Member Trained By
Anna Yu Owner
Greg Teiber Anna Yu
Derek Bever Anna Yu
Everett Wilson Anna Yu

Suggested Tooling

Documentation and Training Materials

Part Names, and what they do: File:Clausing10inLathe4900SeriesOperatingInstructions.pdf