Clausing Lathe
 | |
| Owner/Loaner | Anna Yu and Ed Bennett |
|---|---|
| Serial Number | ? |
| Make/Model | 4900 Series |
| Arrival Date | 3/10/13 |
| Usability | yes |
| Contact | Anna Yu and Ed Bennett |
| Where | Cold Metals |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | yes |
| Host Area | Cold Metals |
Use
Cover the machine when not in use. Keep the cover off of the floor and allow coolant to evaporate before covering again.
A resonance sets in when the variable frequency drive is set to around 50-65%.
A red dot indicates a setting that can only be changed when the lathe is off.
Speeds and feeds
For safety and best results, familiarize yourself with the appropriate feeds and speeds for the material you're working on and the operations you intend to do. Several copies of Machinery's Handbook, the authoritative resource, are on the shelf above the Bridgeport knee mill. Even old editions are just fine for most materials and operations.
Authorization
Contact Anna Yu for authorization. Their contact information is on the side of the lathe.
Individuals must bring 1" diameter x 6" 6061 aluminum round for the Clausing authorization. Aluminum stock can be purchased from Mcmaster Carr (www.mcmaster.com) part number 8974K13
This tool requires Tier 1 Cold Metals Authorization
Due to the complexity of the machine, individuals requesting for authorizations must either have prior metal lathe experience or have a project that would require the use of the machine within two weeks of the given authorization.
List of Currently Authorized Users
| Qualified Member | Trained By | Date Trained | Comments |
|---|---|---|---|
| Anna Yu | Owner | ||
| Ed Bennett | Owner | ||
| Derek Bever | Anna Yu | ||
| Everett Wilson | Anna Yu | No longer a member | |
| Ryan Pierce | Anna Yu | ||
| Colin Parsons | Anna Yu | No longer a member | |
| Mike Warot | Anna Yu | No longer a member | |
| Tucker Tomlinson | Anna Yu | No longer a member | |
| Matthew Triano | Anna Yu | No longer a member | |
| Dillon Gray | Anna Yu | no longer a member | |
| Wayne Openlander | Ed Bennett | No longer a member | |
| Jesse Seay | Anna Yu | ||
| Jeremy Bloyd-Peshkin | Ed Bennett | No longer a member | |
| Kristopher Huisinga | Anna Yu | 10/15/13 | No longer a member |
| Greg Teiber | Anna Yu | 12/10/13 | |
| Bart Dring | Anna Yu | 12/21/13 | |
| Jason Shanfield | Anna Yu | 1/10/14 | |
| Todd Allen | Anna Yu | 1/28/14 | |
| Allen LeSage | Anna Yu | 1/28/14 | |
| Eric R. Klinefelter | Anna Yu | 3/25/14 | No longer a member |
| Edward Muela | Anna Yu | 5/13/14 | |
| Samuel Swope | Anna Yu | 5/13/14 | No longer a member |
| Jay Hopkins | Anna Yu | ||
| David Morton | Anna Yu | 7/22/14 | |
| Thomas Wright | Anna Yu | 7/15/14 | |
| Jabu Dawdu | Anna Yu | 7/29/14 | No longer a member |
| George Shaw | Anna Yu | 8/19/14 | |
| Bryan Gleason | Anna Yu | 10/14/14 | |
| Joao Santos | Anna Yu | 12/9/14 | |
| Dean Anderson | Anna Yu | 12/9/14 | No longer a member |
| Chris Agocs | Anna Yu | 1/16/15 | No longer a member |
| Tom Judge | Anna Yu | 4/14/15 | No longer a member |
| Yehuda (Eric) Braun | Anna Yu | 4/29/15 | No longer a member |
| Michael Patton | Anna Yu | 5/5/15 | No longer a member |
| Ron Olson | Anna Yu | 6/9/15 | |
| Rajiv (Joseph Perera) | Anna Yu | 6/23/15 | |
| Eric Reusche | Anna Yu | 6/30/15 | |
| Andrew Camardella | Anna Yu | 7/11/15 | |
| Niko Hawley | Anna Yu | 10/26/15 | |
| Julia Padvoiskis | Anna Yu | 11/24/15 | |
| Samuel Sion | Anna Yu | 12/12/15 | |
| Les Schier | Anna Yu | 1/12/16 | |
| Dan Locks | Anna Yu | 1/23/16 | |
| Nick Naro | Anna Yu | 3/8/16 | |
| Jacob Rego | Anna Yu | 6/13/16 | |
| Spencer Simms | Anna Yu | 6/23/16 | |
| Jim Brink | Anna Yu | 7/23/16 | |
| Dan Sloboda | Anna Yu | 8/8/16 | |
| Andrew Muhic | Anna Yu | 8/11/16 | |
| Eric Beauchamp | Anna Yu | 9/24/16 | |
| Quinn Campbell | Anna Yu | 10/8/16 | |
| Abel Greenwald | Anna Yu | 4/15/17 | |
| Alan Feinerman | Anna Yu | 5/27/17 | |
| Andrew Wingate | Anna Yu | 6/23/17 | |
| Ryan Himmelblau | Anna Yu | 11/25/17 | |
| McTavish McArdle | Anna Yu | 3/10/18 | |
| Szymon Mirek | Anna Yu | 3/31/18 | |
| Matt Maggio | Anna Yu | 4/14/18 | |
| Seven Strauss | Anna Yu | 6/29/18 | |
| Carlos Garcia | Seven Strauss | 7/8/18 | |
| Dave Solomon | Anna Yu | 8/11/18 | |
| Chris Iacullo | Anna Yu | 9/3/18 | |
| Jeff Benning | Anna Yu | 11/24/18 | |
| Alex Zhu | Anna Yu | 12/01/18 | |
| Daniel Martinez | Anna Yu | 12/29/18 | |
| Oliver Sanchez | Anna Yu | 2/23/19 |
Tooling
- Sandvik Coromat RTBAP 10 2 boring bar
- Minimum bore: .787"
- Maximum overhang: 2.5"
- Insert: TPU 221
Suggested Tooling
Documentation and Training Materials
Authorization Outline: File:PS1 Lathe outline June 30 2018.pdf
Part Names, and what they do: File:Clausing10inLathe4900SeriesOperatingInstructions.pdf
Brochure [[File:]]