Drinking Station: One

Drinking Station: One

Owner/Loaner	PS:One
Serial Number	N/A
Make/Model	N/A
Arrival Date	9/2012
Usability	WORKING
Contact	Ryan Pierce
Where	Lounge
Authorization Needed	yes
Hackable	NO
Estimated Value	$1,200
Host Area	{{{hostarea}}}

Rules

1. If you aren't certified, don't even open the fridge.
2. Don't drink all the beer, that's rude. If you're looking to get hammered go buy a 30rack of PBR.
3. Don't drink the beer if you aren't 21 or older. Just.. come on. Don't.
4. If beer is on tap, you don't have to be certified to help yourself. Pull forward for beer, push to add head. Please pour water in the drip tray when you're done and empty the bucket under the bar (and very importantly, put it back after).

Further rules later, this is just a start at writing things down about the bar.

How To Clean Taps

TBD upload photos and put them on here, step by step instructions.

Cleaning History

Incomplete.

When	Who	What
2/24/2013	Eric & James	Cleaned tap 1 fully and put Beer 2013.02 on tap 1. Tap 2 is soaking the line in PBW water, since it had yeast caked all of it. Don't use it.
3/6/2013	Eric	Took Beer 2013.02 off tap 1 and flushed tap 1 with sanitizer water repeatedly - left sanitizer in line. Tap 2 is soaking the line in PBW water, since it had yeast caked all of it. Tap 1 is good to go, Tap 2 needs more cleaning.
3/24/2013	Eric	Took Beer 2013.03 off tap 1 and flushed tap 1 with sanitizer water repeatedly - left sanitizer in line. Tap 2 is soaking the line in PBW water, since it had yeast caked all of it. Tap 1 is good to go, Tap 2 needs more cleaning.
6/4/2013	Matt Triano, Tucker Tomlinson	Filled both lines with PBW.
8/30/2013	Ryan Pierce	Reconnected tap lines after disassembly. Flushed lines repeatedly with PBW.

Use with Sankey kegs

The Kegerator system can be used with Sankey kegs. These are the kegs that commercial breweries use. The capacity is two 1/2 barrel (15.5 gallons each) kegs. Note that this has only been tested with Kegcraft kegs, which are used by Revolution and other microbreweries in town. (But that is what matters. Come on, with a bar this cool, do you really want to put MGD on tap?)

Both keg couplers are fitted with MFL connections for gas, which means that you do not

The lower shelf is the default place for a keg. The keg must be propped up on the 2x4 stand so that the refrigerator door will close completely. There is very little clearance for the keg coupler, and you may need to rotate the keg such that you can install the coupler, turn it to lock it, and not run into the blower assembly for the draft tower duct.

List of Currently Certified Users

Qualified Member	Trained By
Ryan Pierce	Built draft system
Eric Stein	Ryan Pierce

TODO

• Screw down the top of the bar; it is loose as is. Could unscrew later if we need to remove it.
• Install wood trim
• Build enclosure for fridge
• Upgrade from 2 to 4 taps
• Temperature sensors in fridge and tap line
• Beverage line locks and RFID controls