Eclipse Scroll Saw
Jump to navigation
Jump to search
 | This tool is currently broken, please contact the area host for more information. |
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | SERIAL NUMBER |
| Make/Model | MODEL NUMBER |
| Arrival Date | 2019 |
| Usability | no |
| Contact | Jim Brink |
| Where | Cold Metals |
| Authorization Needed | no" |
| Hackable | no |
| Estimated Value | $999 |
| Host Area | Cold Metals |
Use
For scroll saw work
Safety Instructions: -Turn off,when not in use. -Remove clamp tool from lower blade clamp before operation -Stay alert. Always focus closely on what you are doing. Do not operate the saw when you are tired. - Keep guards in place. Make sure guards are in working order and in proper adjustment and alignment. -Use of a dust mask and safety glasses are recommended. Never reach under the table while the saw is running. - If an extension cord is used, be sure it is grounded and the wire gauge is correct for it’s length to handle 18 amps.
Note
Please see the service manual. Please see the Schematic.pdf wiring schematic.