Epilog Laser settings

From Pumping Station: One Wiki
Revision as of 16:46, 31 March 2017 by Daddybird (talk | contribs) (Daddybird moved page Laser settings to Epilog Laser settings: We now have two lasers, each with their own settings.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Settings for various materials.

This data was generated using PS:One's Epilog 30w Mini 24. Please keep that in mind when using this information for other cutters.

Material Speed Power Frequency
Cardstock (perforate) 80 45 175
Corrugated Cardboard (cut) 25 50 500
Corrugated Cardboard (etch) 100 50
1/4" Aspen (cut) 7 100 500
1/4" mdf (cut) 7 100 500
1/8" birch plywood (cut) 15 100 500
1/4" Maple (cut) 6 95 500
Maple (engrave) 35 100
1/4" mirror back acrylic (cutting from back) 10 100 5000
Cork (engrave) 45 100
1/8" PETG (cut) make 3 passes 35 100 500 put wet newspaper on top to prevent charring
PETG (engrave) 100 60
Foamies (tm) 2mm sheet 100 30 500
Acrylic (1mm engrave depth with crisp edges) Regular settings for Acrylic and print 3 copies
Hardboard (Masonite) 1/8" (3mm) 5 100 500

More power settings from NYCResistor (though theirs is a 35w model and ours is 30w)