Evolution RAGE Saw

From Pumping Station One


Evolution RAGE Saw Dan Meyer Area: {{{hostarea}}} https://wiki.pumpingstationone.org/wiki/Evolution_RAGE_Saw

Evolution RAGE Saw
Owner/Loaner Dan Meyer
Make/Model Rage 2
Arrival Date 2012
Usability WORKING
Contact Dan Meyer
Where Machine Shop
Authorization Needed yes
Hackable no
Estimated Value $250
Host Area {{{hostarea}}}




Note

This saw can cut many common fabrication materials. The problem with this is there is a tendency to think it can cut anything economically. This is NOT true.

The stock multipurpose blade is awesome, according to specifications the multipurpose blade can cut:
Mild Steel
Aluminum
Wood and Wood with nails (if you cut wood please clean up the saw dust, it's a serious fire hazard in the "hot work" area of the shop)
Some Plastics

The multipurpose blade should not be used to cut:
Hardened Steel (use a abrasive cut off wheel for any steel harder than mild steel, cut off wheels are a much more economical for cutting hard steel than damaging the $70.00 multipurpose blade)
Masonry and tile products (requires optional diamond blade)

List of Currently Certified Users

This tool requires certification for use.

Qualified Member Trained By
Dan Meyer Dan Meyer
Shawn Blaszak Dan Meyer
Jordan Bunker Dan Meyer
Steve Finkelman Dan Meyer
Mike Warot 'twas during the move...
Larry Thorpe Mike Warot

This tool may require training to be used correctly.

Training Resources

Links:
Evolution Rage 2 14" (355mm) TCT Multipurpose Cut Off Saw