FormLabs Form 1+ SLA 3D Printer
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | SERIAL NUMBER |
| Make/Model | FormLabs Form 1+ SLA 3D Printer |
| Arrival Date | June 2017 |
| Usability | yes |
| Contact | CNC Area Host |
| Where | CNC Shop |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $2,000 |
| Host Area | CNC |
About
3D SLA Printer
Status
- The main limitation to new users is that both the tank and the resin are considered consumables, that you must provide for yourself. "One standard tank lasts for about 2 L of our resin. With a separate tank for each individual resin color, switching materials is as easy as sliding in a new tank."
- Each tank is (in 2018) $59 and each build platform is $99 https://formlabs.com/store/us/form-1/buy-accessories/
- White resin, the most common type, is about $149 per liter. https://formlabs.com/store/us/form-1/buy-materials/
Authorizations
- Power-On & Safety Check
Settings
- Required software, called Preform, is proprietary and available, free, from FormLabs https://support.formlabs.com/hc/en-us/categories/115000005384-Software
Procedures
Powering On Machine
Powering Off Machine
Material Safety & Information
Resources
- Support link: https://support.formlabs.com/hc/en-us/categories/115000003004-Form-1-
- Each tank is (in 2018) $59 and each build platform is $99 https://formlabs.com/store/us/form-1/buy-accessories/
- White resin, the most common type, is about $149 per liter. https://formlabs.com/store/us/form-1/buy-materials/
Youtube Channels
Following are a couple good YouTube Channels with lots of information on the software and machine
Cleaning & Maintenance
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Andrew Camardella | Danger Committee |
| Kathryn Born | Danger Committee |
| Aaron Feigan | Danger Committee |
| Ashish Jasani | Danger Committee |
| Anna Yu | Danger Committee |