292
edits
Changes
Jump to navigation
Jump to search
Line 1:
Line 1: + + Line 13:
Line 15: − + + + − + + Line 22:
Line 27: + + − − 'Note that as of 4/6/2016 the RFID stuff hasn't been re-enabled; gonna work on that soon.' Line 52:
Line 57: + + +
no edit summary
{{mbox |type=warning |text=This equipment has been decommissioned. [[IT Infrastructure|Up-to-date IT information can be found here]] }}
{{Template:EquipmentPage
{{Template:EquipmentPage
|owner = Ron Olson
|owner = Ron Olson
= Current Status =
= Current Status =
11/28/16 - BBB is not responsive and appears to be defunct. Power supply has been measured and is supplying 5.1V. All items were unplugged and restarting the BBB was unsuccessful.
9/13/17 RFID access is provided by another system; the BBB is no longer at the back door and isn't part of the door access system.
11/28/16 - BBB is not responsive and appears to be defunct. Power supply has been measured and is supplying 5.1V. All items were unplugged and restarting the BBB was unsuccessful. Several components are in the bottom of the mailbox on the front door. RFID reader module works. Status lights can be added back in line with the circuit that switches the latch. Marquee is not connected and may have been flashed without the software written by [[User:Tachoknight]]
= Next Steps =
= Next Steps =
*Check voltage pads on the BBB to see if maybe there is a bad connection at the connector.
*Add enclosure and equipment label
*Check voltage pads on the BBB to see if maybe there is a bad connection at the power connector.
*Remove BBB from the door and fasten to the wall by the door latch
*Remove BBB from the door and fasten to the wall by the door latch
*Put USB wire through the door frame and place RFID in a static location on the wall outside. Must be placed inside a waterproof container - consider potting.
*Put USB wire through the door frame and place RFID in a static location on the wall outside. Must be placed inside a waterproof container - consider potting.
= Functions =
= Functions =
This BBB is part of the [[RFID]] system.
The front door Beaglebone will serve two purposes, to have a scrolling marquee of public information about PS1 on the screen, as well as allowing access via the RFID reader.
The front door Beaglebone will serve two purposes, to have a scrolling marquee of public information about PS1 on the screen, as well as allowing access via the RFID reader.
== Marquee ==
== Marquee ==
* [https://github.com/loansindi/ps1rfid/blob/master/bom.MD BOM]
* [https://github.com/loansindi/ps1rfid/blob/master/bom.MD BOM]
* [https://github.com/loansindi/ps1rfid Source Code]
* [https://github.com/loansindi/ps1rfid Source Code]
[[Category:Loaned Equipment]]