Grizzly 6" jointer
Jump to navigation
Jump to search
 | This tool is currently broken, please contact the area host for more information. |
 | |
| Owner/Loaner | Matt Triano |
|---|---|
| Serial Number | NA |
| Make/Model | G0654 |
| Arrival Date | Sept 2013 |
| Usability | Blades need to be REPAIRED |
| Contact | Matt Triano |
| Where | Woodshop |
| Authorization Needed | yes |
| Hackable | NO |
| Estimated Value | $525.00 |
| Host Area | {{{hostarea}}} |
Rules
- Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
- Always use the vacuum while running the jointer. Otherwise, it will clog with chips.
- If you break something, or damage the tool, contact the area host immediately. Don't let others do more damage or hurt themselves by using a broken tool.
- Always vacuum the machine, cutting area, and the table around the machine when you are done.
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Matt Triano | Owner |
| Michelle Garcia | Matt Triano |
| Ian Cochran | Matt Triano |
| Daylan Dufelmeier | Matt Triano |
| Justin Miles | Matt Triano |