Difference between revisions of "Lulzbot Taz3"

From Pumping Station: One Wiki
Jump to: navigation, search
(List of Currently Certified Users)
Line 320: Line 320:
 
|Wessing
 
|Wessing
 
|[[User:rdoeksen|Ray Doeksen]]
 
|[[User:rdoeksen|Ray Doeksen]]
 +
|-
 +
|[[User:w9lp|Casey Coley]]
 +
|Andrew Camardella
 
|-
 
|-
 
[[Category:Fabrication]]
 
[[Category:Fabrication]]
 
[[Category:CNC]]
 
[[Category:CNC]]

Revision as of 16:21, 1 September 2015


Lulzbot Taz3
Taz3.jpg
Owner/Loaner PS:One
Serial Number KT-PR0013-5509
Make/Model Aleph Objects Taz3
Arrival Date January 2014
Usability yes
Contact Elizabeth
Where CNC 2nd Floor
Authorization Needed yes
Hackable no
Estimated Value $2395
Host Area {{{hostarea}}}


Lulzbot Taz3 Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Lulzbot_Taz3



Status

As of 7/20/2015 nozzle clogged with PLA, resistor wire is broken (needs replacement), bottom wood disk is broken (needs replacement) --Andrew Camardella 7/20/2015 5:35pm

As of 6/3/2015 nozzle unclogged, tested with ABS. --Rdoeksen (talk) 19:22, 3 June 2015 (CDT)

As of 6/1/2015 clogged with PLA through the length of the hot end and nozzle. Needs to be disassembled, burned out, nozzle cleaned. Probably needs replacement nozzle. Needs replacement parts for the hot end (wood discs, maybe aluminum disk) --Rdoeksen (talk) 18:53, 1 June 2015 (CDT)

As of 5/20/2015 not clogged, running normally.

Seems to be extruding fine as of 4/30/2015. [Extruder nozzle clogged. Needs unclogging or nozzle replacement. (As of 4/28/2015, clogged )]

SD card reader DOES NOT WORK. Works only in tethered mode, driven by USB from a computer.

Spool hanging bolt on enclosure sure could use an upgrade. It is long enough but there is no positive catch to keep the spool in place.

Authorization

Under construction.

Operation

  • Turn the printer off when you are no longer using it.

Troubleshooting

Under construction.

Mods

Factory standard settings, accessories and equipment. Alternate Flexistruder available at PS1 but not installed.

Windows Drivers

Windows users driving the printer tethered (over a USB cable) will need to install drivers.

Usable Print Area

298mm x 275mm x 250mm (11.7in x 10.8in x 9.8in)

Nozzle size

  • 0.35 mm nozzle (please verify?)

Host Software

Users of Linux, Windows, OSX will need to install the following software:

Suggested Settings

Both of these files have appropriate settings for the 'printer settings' and 'filament settings' tabs. To use them, go to File > Load Config in Slic3r and select the downloaded file. You must then go to each tab and hit the 'save' icon next to the settings selection dropdown box, or else Slic3r will forget the settings when you close it.

ABS Print Settings Without Support - Fast

File:Taz3 print settings NO SUPPORT.ini

This file is for the 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile does not include support, so for large overhangs you'll need the next configuration file.

ABS Print Settings With Support - Fast

File:Taz3 print settings SUPPORT.ini

This file is for 'print settings' tab of Slic3r. This is a 'fast' profile, geared towards finishing prints relatively quickly. It still provides excellent surface quality. This profile includes support, appropriate for large overhangs.

Other Resources

The manual is available online. A printed form of it can be found near the printer. The manual explains how to operate the printer.

Filament

The extruder usually mounted accepts 3 mm filament, and can print either ABS or PLA. There is an alternate extruder for use with Ninjaflex.

Inventables

Monoprice

Find Something to Print

Thingiverse is a great place to find printable 3D models that other people have designed, and to publish your own.

Designing 3D Models

Page in progress to describe 3D modeling.

List of Currently Certified Users

qualified member trained by
Derek Bever Hours of shouting at 3D printers
Elizabeth Koprucki Derek Bever
Andrew Kos Elizabeth Koprucki
Ray Doeksen Elizabeth Koprucki
Everett Wilson Derek Bever
David Earley Derek Bever
Lyn Cole Derek Bever
Greg Teiber Derek Bever
Nick Castillo Derek Bever
Tom Forajter Elizabeth Koprucki
David Ditzler Elizabeth Koprucki
David Fell Elizabeth Koprucki
Rob Riggs (Colorado Rob) Elizabeth
Mark Stevens Elizabeth Koprucki
Arturo Duarte Elizabeth Koprucki
Justin T. Conroy Derek Bever
James Porter Elizabeth Koprucki
Ryan Kelly Elizabeth Koprucki
Janet Dornhoff Elizabeth Koprucki
Genevieve Aphrodite Justin Conroy
Sloan Lavery Elizabeth Koprucki
Adam Glick Ray Doeksen
Tyler Natoli Elizabeth Koprucki
Chris Marchwick Elizabeth Koprucki
Marty Dubin Elizabeth Koprucki
Tom Judge Justin Conroy
Brian Dunn Derek Bever
Tim Lofgren Derek Bever
Jeff McBride Elizabeth Koprucki
Thomas Wright Justin Conroy
David Siegfried Derek Bever
Donald Jacobson Elizabeth Koprucki
Clarence Risher Elizabeth Koprucki
Will Garza Elizabeth Koprucki
Nick Halderman Elizabeth Koprucki
Michael Maloney Elizabeth Koprucki
Brennan Koziarz Elizabeth Koprucki
Roger Moore Elizabeth Koprucki
Aaron Mintz Elizabeth Koprucki
Matt Makris Elizabeth Koprucki
Matt Meshulam Elizabeth Koprucki
Ron Olson Elizabeth Koprucki
Darold Higa Ray Doeksen
Nora Sluzas Elizabeth Koprucki
Matt Triano Elizabeth Koprucki
Curtiss Cooke Elizabeth Koprucki
Andrew Sowa Elizabeth Koprucki
Eric Yu Elizabeth Koprucki
Lucas Goossen Elizabeth Koprucki
Jessica Wiedner Derek Bever
Scott Little Derek Bever
Kevin Pulver Ray Doeksen
Jenny Tong Ray Doeksen
Mike Mandrea Elizabeth Koprucki
John Farmer Elizabeth Koprucki
Andy Richardson Elizabeth Koprucki
Alex Trimm Elizabeth Koprucki
Rick Alm Elizabeth Koprucki
Davis Mazariegos Elizabeth Koprucki
Knute Martell Elizabeth Koprucki
Hugh Sato Elizabeth Koprucki
Ryan Neuman Will Garza
Tina C Elizabeth Koprucki
Scott Drane Elizabeth Koprucki
Michael Patton Ray Doeksen
Chris Leeson Ray Doeksen
Matt Pollina Ray Doeksen
Scott Anamizu Ray Doeksen
Doorman Dave Elizabeth Koprucki
Simon Pyle Ray Doeksen
Brad Jiminez Ray Doeksen
Nate Scheidler Ray Doeksen
Alan Insley Ray Doeksen
Wessing Ray Doeksen
Casey Coley Andrew Camardella