Prusa i3 MK2S .202

From Pumping Station: One Wiki
Revision as of 23:34, 20 December 2017 by Ajasani (talk | contribs) (Created page with "{{Template:EquipmentPage |owner = PS:One |hostarea = CNC |certification = yes |hackable = no |model = Prusa i3 MK2S |serial = SERIAL NUMBER |arrived = 12/2017 |where = CNC Are...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Prusa i3 MK2S .202
Owner/Loaner PS:One
Serial Number SERIAL NUMBER
Make/Model Prusa i3 MK2S
Arrival Date 12/2017
Usability no
Contact CNC Area Host
Where CNC Area, downstairs
Authorization Needed yes
Hackable no
Estimated Value $500
Host Area CNC


Prusa i3 MK2S .202 Area: CNC https://wiki.pumpingstationone.org/Prusa_i3_MK2S_.202



Status

4/24/2017 - Printer bed connector is failing, could be failing print bed causing excess current draw; install solid state relay and if problem persist replace with silicone heater bed. Uneven extrusion or slippage, possible problem with the hobbed bolt; brass and is going bad; Should be replaced with stainless steel one. (ajasani)