Difference between revisions of "Prusa i3 MK3S A 3D Printer"
Jpapiewski (talk | contribs) |
Jpapiewski (talk | contribs) |
||
Line 42: | Line 42: | ||
== Operation == | == Operation == | ||
− | === | + | ===Prepare the Printer=== |
− | ==== | + | ====Check/Load material spool''==== |
+ | Remove any other printed models from the bed if they are finished and set aside. If the owner left contact information, leave it with the model. | ||
− | + | ====Clean the bed''==== | |
+ | =====Before printing with PLA or ABS, but not PETG, clean with a few light swipes of an alcohol wipe ===== | ||
− | ==== | + | ====Set printer settings for your job''==== |
− | + | =====You can control & monitor bed & nozzle temps and other parameters from OctoPrint ===== | |
− | |||
− | === | + | ===Prepare Your .STL file=== |
− | |||
− | ===='' | + | ====Open your .STL model file in PrusaSlicer, Cura, or other slicer software''==== |
− | + | ====Orient the model onto the bed''==== | |
− | + | ====Set values for various parameters:==== | |
− | === | + | =====Nozzle and bed temperature===== |
− | + | =====Print quality/layer thickness===== | |
+ | =====Infill percent===== | ||
+ | =====Other settings as needed===== | ||
+ | ====Slice the model.''==== | ||
+ | ====Note the estimated time to print.''==== | ||
+ | ====Save the resulting .GCODE file.''==== | ||
+ | ===Open OctoPrint in a browser tab=== | ||
+ | ===Upload .GCODE to OctoPrint.=== |
Latest revision as of 03:55, 31 May 2020
Owner/Loaner | PS:One |
---|---|
Serial Number | SERIAL NUMBER |
Make/Model | Prusa i3 MK3S |
Arrival Date | 3/2020 |
Usability | yes |
Contact | CNC Area Host |
Where | CNC Area, downstairs |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $800 |
Host Area | CNC |
Description
A very nice filament-based (FDM) 3D printer. There are currently three of these at PS1.
Uses 1.75 mm filament. Capable of printing many different kinds of filament, including PLA, ABS, PETG, and more. Ships with 0.4 mm nozzles.
For more info, see https://www.prusa3d.com/new-user-mk3/
Status
03/2020 - Three Prusa MK3S purchased, assembled, installed and made fully operational.
OctoPrint
All three Prusa printers are operated and managed via an OctoPrint print server. Users upload their gcode files to the printers through the OctoPrint interface, accessible through PS1's internal Wi-Fi network.
OctoPrint IP addresses for each printer:
Blue Prusa 10.30.0.11
Purple Prusa 10.30.0.12
Red Prusa 10.30.0.13
Operation
Prepare the Printer
Check/Load material spool
Remove any other printed models from the bed if they are finished and set aside. If the owner left contact information, leave it with the model.