Prusa i3 MK3S A 3D Printer
Owner/Loaner | PS:One |
---|---|
Serial Number | SERIAL NUMBER |
Make/Model | Prusa i3 MK3S |
Arrival Date | 3/2020 |
Usability | yes |
Contact | CNC Area Host |
Where | CNC Area, downstairs |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $800 |
Host Area | CNC |
Description
A very nice filament-based (FDM) 3D printer. There are currently three of these at PS1.
Uses 1.75 mm filament. Capable of printing many different kinds of filament, including PLA, ABS, PETG, and more. Ships with 0.4 mm nozzles.
For more info, see https://www.prusa3d.com/new-user-mk3/
Status
03/2020 - Three Prusa MK3S purchased, assembled, installed and made fully operational.
OctoPrint
All three Prusa printers are operated and managed via an OctoPrint print server. Users upload their gcode files to the printers through the OctoPrint interface, accessible through PS1's internal Wi-Fi network.
OctoPrint IP addresses for each printer:
Blue Prusa 10.30.0.11
Purple Prusa 10.30.0.12
Red Prusa 10.30.0.13
Operation
1. Prepare the Printer
1a. Clean the nozzle
put info here
1b. Check/Load material spool
Remove existing spool, if necessary.
put more info here.
1c. Clean the bed
put info here
1d. Set printer settings for your job
put info here - note: for the 203 OctoPrint printer, you can control & monitor bed & nozzle temps
2. Prepare Your .STL file
Put info about Prusa Slicer here...