Ridgid Oscillating Spindle Sander

From Pumping Station: One Wiki
Revision as of 09:25, 5 June 2015 by Kziegel (talk | contribs) (List of Currently Certified Users)
Jump to: navigation, search

Ridgid Oscillating Spindle Sander
Owner/Loaner PS:One
Serial Number NA
Make/Model G0654
Arrival Date December 2014
Usability yes
Contact Matt Triano
Where Woodshop
Authorization Needed yes
Hackable NO
Estimated Value $200.00
Host Area {{{hostarea}}}

Ridgid Oscillating Spindle Sander Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Ridgid_Oscillating_Spindle_Sander


  1. Always check your wood for nails or staples. If you're not sure, check the entire piece with the metal detector or a magnet.
  2. Always use dust collection.
  3. Always use the appropriate washer with the oscillating drums, and put the washers away when you're done.
  4. Adjust the belt sander so that the belt tracks without running against the metal supports.
  5. Always replace washers and throat plates in their respective slots on the front of the machine when you switch accessories.


List of Currently Certified Users

Qualified Member Trained By
Matt Triano Matt Triano
Erin Kunkel Matt Triano
Tyler Matthew Matt Triano
Shae Kurko Matt Triano
Ben Bogler Matt Triano
Sam Paris Ron Olson
Knute Martell Ron Olson
Chris Kleehammer Jason Shanfield
Trey Elliott Jason Shanfield
Nik Brink Jason Shanfield
Frances Ritchie Ron Olson
Ben Kern Ron Olson
Eric Yu Ron Olson
Karol Slowikowski Ron Olson
Chris Smith Ron Olson
Ryan Pierce Matt Triano
Benjamin Miller Ron Olson
Jennie Plasterer Ron Olson
Eugene Liokumovich Ron Olson
Tomas Ward Ron Olson 4/26/2015
Les Schier Jason Shanfield 5/2/15
Hunter Koerner Eric Beauchamp 6/4/15
Kurt Ziegel Eric Beauchamp 6/4/15