Rockwell Delta 20" Bandsaw

From Pumping Station One


Rockwell Delta 20" Bandsaw Pumping Station:One Area: Wood Shop https://wiki.pumpingstationone.org/wiki/Rockwell_Delta_20%22_Bandsaw

Rockwell Delta 20" Bandsaw
RockwellDelta20Bandsaw.jpg
Owner/Loaner Pumping Station:One
Serial Number 1457257
Make/Model 28-350
Arrival Date 8/26/15
Usability yes
Contact matt . triano @ gmail . com
Where Wood Shop
Authorization Needed yes
Hackable no
Estimated Value $1,000
Host Area Wood Shop





Status

  • 3/6/2019. Andrew w replaced drive belt
  • 2/23/2019 drive belt broke, status will be updated once underway/fixed.
  • 10/18/2018 blade broke & Eric B. replaced it
  • 5/31/2019 someone broke off one of the guides while “brushing off” the table. it is usable but blade stability is poor. NEW guide made by helpful cold metals.
  • . 8/2019. Drive belt and pulley came off drive shaft. Eric and Gary replaced but drive belt does not run perfectly true. Brake does not seem to be optimally functional. Ralph will do a tune up soon.
  • Tires are out of lateral alignment as well. Ralph and helpers will do a total overhaul Saturday 9/7/2019
  • 9/8/2019. Ralph and Tim did total overhaul with new tires and belt. But later in day, blade was reportedly running off lower tire.
  • Ralph repaired lower tire. Discovered that we cannot run at fastest pulley setting.
  • 9/10 throat plate broken again
  • 9/16/19 joe made new throat plate
  • 10/13/19. Ralph discovered major bearing issues. Parts ordered.
  • 11/2/2019. Ralph put it back into service with the great assistance of Jim brink
  • 12/29/2019 thrust bearings and guides failure
  • 12/31/2019 Ralph replaced thrust bearings, guides and other pats top wheel bearing/shaft still needs work, but she's usable again
  • 1/8/2020 blade badly kinked. person was sawing fresh bark-on logs. i spoke with him AFTER. gn

switched to fine blade. new 1/2 inch blade on wall hanger


Notes

manual: File:Rockwell-28-350.pdf related manual with more details: File:Rockwell20bandsaw.pdf

The best manual is at http://www.walkemooretools.com/wp/wp-content/uploads/2015/07/Delta_Rockwell-bandsaw-manual.pdf

Authorization; How to get Authorized

  • Authorizations for the 14" Rockwell do not carry over to this tool
  • This tool requires authorization for use.
  • To be authorized, please see an authorized proctor/trainer from the list, below.

Consumable Parts

  • This saw takes 141" blades.
  • Thrust bearings type 6203-2Z (17mm x 40mm x 12mm). Be sure to get 2Z or ZZ (steel shield) and not 2RS (rubber shield).
  • Throat plate. We still need this made frequently

Throat plate templates/model courtesy of Joe Dowling

zip of SKP, STL and f3D files : File:Bandsaw Plate.zip

image Media:picofbandsawplate.jpg and

Fusion 360 model at Joe's Adobe360 https://a360.co/2RdzuCe

There is usually a spare plates in the locked cabinet


Tips on Use

This section is based on a discussion that took place on the mailing list.

Band-saws have two main uses in the wood shop:

  1. The primary use is to make curved cuts in a piece of flat wood. In this case the piece is held by hand and guided so the blade follows the curve. A fence is counterproductive for this use.
  2. The second is resawing lumber that is too thick for the table saw. This is typically, but not exclusively, done with valuable pieces of wood for the purpose of creating a veneer. A fence may be appropriate for this use.

With a bandsaw, you basically never want to have the fence locked parallel to the blade. Every blade will have some degree of drift, and it is necessary to accommodate this drift to achieve a straight cut. There are two common solutions: single-point fences, and adjustable angle fences. PS:1 has both a nice magnetic adjustable fence and a single-point fence that attaches to it.

With a single point fence, you adjust for the drift angle by eye as you cut. This quick and easy method is most appropriate for resawing of narrower boards with a width of 6" or less.

For wider boards, use the adjustable fence with a tall secondary fence attached, carefully adjusted to the drift angle of the blade. For really wide boards, you can also use a presser-board to ensure contact with the fence.

Some additional advice on resawing:

  • Buy a nice blade and learn how to install and adjust it. The PS:1 blades are often fairly dull and don't track well.
  • Make sure your stock is prepared well, with at least one flat face and one square and flat edge.
  • Try to keep only 3-10 teeth in the wood. A 1.5 tpi blade is appropriate for most resawing.
  • Use a skip-tooth blade, at least 1" wide (but see note below).


Authorized Proctors

This tool requires authorization for use by an authorized proctor. Please contact one of the following to arrange authorization.

Proctor Contact
Eric Beauchamp — area host eric @ home-chicago.com
Ralph Brendler
Paul VanLake
Michelle DeLeon

List of Currently Authorized Users

Qualified Member Trained By Date
Keon Turner Ron Olson
Hunter Koerner Eric Beauchamp
Deanna Williams Eric Beauchamp
Ray Doeksen Eric Beauchamp
Burton Kent Eric Beauchamp
Casey Olson Jason Shanfield
Tom Judge Matt Triano
Jeff Smykil (Pending confirmation)
Anna Yu Matt Triano
Jon Levine Jason Shanfield
Kyle Bieneman Eric Beauchamp
Niko Hawley Eric Beauchamp
Kevin Mitchell Eric Beauchamp
Adam Moffatt Jason Shanfield
Peter Letscher Eric Beauchamp 11/05/15
Glenn Trussell Eric Beauchamp 11/05/2015
Aaron Carlock Eric Beauchamp 11/19/2015
Patrick Lynch Eric Beauchamp 11/19/2015
Shine Chen Eric Beauchamp 11/19/2015
Mike Forkan Eric Beauchamp 11/19/2015
Ethan Sanders Eric Beauchamp 11/19/2015
Alex Al-Hamdan Eric Beauchamp 12/04/2015
Alvaro Caceres Eric Beauchamp 12/03/2015
Kevin Schwartzenberg Eric Beauchamp 12/03/2015
Marcin Ignasiak Eric Beauchamp
Thomas Ward Andy L. 11/18/2015
Kelly Steensma Eric Beauchamp 11/19/2015
Dan (Mike) Arwine Eric Beauchamp 11/19/2015
Connor Sullivan Eric Beauchamp 1/8/2016
Chris Kohl Eric Beauchamp 1/8/2016
Erik Funkhouser Ron Olson 11/01/2015
Peter Brask Eric Beauchamp 1/14/16
Andrew Dalesandro Eric Beauchamp 1/14/16
Shelly Loke-Gayares Eric Beauchamp 1/14/16
Saul Weiner Eric Beauchamp 1/14/16
Brandon Love Eric Beauchamp 1/28/16
Sam Paris Eric Beauchamp 1/28/16
Craig Koszewski Eric Beauchamp 1/28/16
Christopher Carson Eric Beauchamp 2/25/16
Jared K Andy L 3/03/16
Keith Couture Eric Beauchamp 3/10/16
Brian Cuocci Andy L 3/17/16
Julie Zwolinski Eric Beauchamp 3/24/16
Nick Puglisi Eric Beauchamp 4/21/16
Andy Muhic Andy Larkin 4/28/16
Colin Campbell Andy L 5/5/16
Ken Burkhardt Andy Larkin 5/5/16
Hans Griese Andy Larkin 5/5/16
Josh Younger Eric Beauchamp 5/19/16
Ian Monroe Eric Beauchamp 5/19/16
An Phan Andy Larkin 7/7/16
Donald Wells Andy Larkin 8/4/16
Derwin Umali Andy Larkin 8/7/16
McTavish McArdle Andy Larkin 2016-08-04
Joe Dowling Ken Burkhardt 8/15/16
Leo Rodman Jason S 9/12/16
Guillaume Emont Ken Burkhardt 9/19/16
Max Rashes Ken Burkhardt 9/20/16
Revant Ohri Andy L 9/15/16
Aaron Mintz Ken Burkhardt 10/17/16
Brian Carstensen Ken Burkhardt 10/17/16
Jon Komperda Ken Burkhardt 10/17/16
Regan Via Ken Burkhardt 10/17/16
Robert Richardson Ken Burkhardt 10/17/16
Ryan Fiebing Ken Burkhardt 10/24/16
Jack Berg Ken Burkhardt 11/07/16
Logan Price Andy Larkin 11/21/16
Kris Blouch Andy Larkin 11/21/16
Tony Iacullo Andy 12/5/16
Chris Ruhland Andy Larkin 01/05/17
John McBride Andy Larkin 01/19/17
Will Heil Andy Larkin 01/19/17
Dusty Buyck Andy Larkin 01/19/17
Bruce Mace Eric Beauchamp 02/20/17
Matthew Quigley Andy Larkin 03/02/17
W. Anthony Claypool Andy Larkin 03/16/17
Crystal Morales Andy Larkin 2017-03-16
Jason Pittman Andy Larkin 2017-03-16
Sam Chen Andy Larkin
Abel Greenwald Andy Larkin
Andrew Vaughan Andy Larkin 2017-04-25
Molly Adamski Ralph Brendler 4/27/17
Shabab Mustafa Ralph Brendler 4/27/17
Adomas Tautkus Ralph Brendler 4/27/17
Crystal Zapata Ralph Brendler 4/27/17
Alexa Viscius Ralph Brendler 4/27/17
David Earl Ralph Brendler 5/4/17
Paul McClay Ralph Brendler 5/18/17
Jim Handley Ralph Brendler 5/13/17
Luis Colmenares Ralph Brendler 6/1/17
Kari Danek Ralph Brendler 6/15/17
Christophe Laurent Ralph Brendler 8/10/17
Danielle MacDonald Ralph Brendler 2017-06-29
Zack Sasnow Paul Van Lake 8/3/2017
Arjun Sharma Ralph Brendler 8.10.17
Justin Pestka Ralph Brendler 8.30.17
Sam Dreyer Ralph Brendler 8/30/17
Jacob Snyder Ralph Brendler 9/7/17
James Beck Ralph Brendler 9/13/17
Joanna C. Sam O. 9/27/17
Mark Haughey Sevin Straus 9/30/17
Jacqueline Villa Maria Miller 10/3/17
Mike Thariath Ralph Brendler 10/19/17
Benjamin Nuttin Ralph Brendler 11/02/17
Karl Healy Ralph Brendler 11/2/17
Tee Paul V 11/09/17
Nick Fera Paul V 11/09/17
Jeremie Davis Ralph Brendler 11/16/17
Nathan Witt Ralph Brendler 11/30/2017
Corey Toyama Ralph Brendler 11/30/2017
Theo T Ralph Brendler 11/30/2017
Wally Ibrahim Ralph Brendler 11/30/17
Jeff Hassberger Ralph Brendler
Wally Ibrahim Ralph Brendler 11/30/17
Mac MacDevitt Paul V 12/7/17
Ben Starett Ralph Brendler 12/14/17
Ross Hanchett Ralph Brendler 12/14/17
Michael Donovan Ralph Brendler 12/14/17
Alex Tomala Ralph Brendler 12/21/17
Jamin Nollsch Ralph Brendler 12/28/17
Chris Versteeg Ralph Brandler 12/28/17
Aaron Vander Bee Ralph Brandler 1/11/18
Ben Farmer Ralph Brendler 1/11/18
Joseph Crouch Ralph Brendler 1/11/18
Bradford Smith Ralph Brendler 1/11/18
Stephanie Pelzer Ralph Brendler 1/11/18
Amanda Assaley Ralph Brendler 1/11/18
Chris Eppig Ralph Brendler 1/11/18
Patrick Smith Ralph Brendler 1/11/18
Jeff Gershune Paul VanLake 1/16/18
Bryan Pennington Ralph Brendler 1/25/18
Michael Ice Ralph Brendler 2/08/18
Francisco becerril Ralph Brendler 2/08/18
Brandon Kennedy Ralph Brendler 2/22/18
Charles Barker Ralph Brendler 3/8/18
Dan Mach Ralph Brendler 3/8/18
Ricardo Staudt Ralph Brendler 3/8/18
Paul Graham Ralph Brendler 3/22/18
Mike Gucciard Ralph Brendler 3/22/18
Wayne Warren Ralph Brendler 3/22/18
Adam Hall Paul V 3/29/18
Bill Schroeder Ralph Brendler 4/5/18
Mike Wilkin Ralph Brendler 4/19/18
Alex Lanigan Ralph Brendler 4/19/18
Jessica Jokhi Ralph Brendler 4/19/18
Matt Maggio Ralph Brendler 4/19/18
Jonathan Frink Ralph Brendler 4/19/18
Gary Newhouse Ralph Brendler 4/19/18
Dave DesRoberts Paul Van Lake 4/26/18
Jennifer DesRoberts Paul Van Lake 4/26/18
Wayne Hendryx Ralph Brendler 4/19/18
Brendan Fortune Ralph Brendler 5/17/18
Fritz Sullivan Ralph Brendler 5/30/18
Elizabeth Reuter Ralph Brendler 5/30/18
Kirsten Landmark Masih Ralph Brendler 6/07/18
Chris Niziolek Ralph Brendler 6/14/18
Bob Fritz Ralph Brendler 6/14/18
Nate Myren Ralph Brendler 6/14/18
Eli Schlossberg Ralph Brendler 6/14/18
Daniel Willmott Paul V 6/21/18
Bruce Levin Paul V 7/05/18
Joe Day Paul V 7/05/18
Mike Yacobucci Ralph Brendler 7/12/18
Kathryn Connolly Paul V 7/19/18
Sam Lewis Paul V 7/19/18
Aaron Hale Ralph Brendler 7/26/18
Adam Wilk Ralph Brendler 7/26/18
Geoff Klein Paul V 9/13/18
Earl Wood Paul V 9/13/18
Jacob Dawson Paul V 9/13/18
Nick Prorok Ralph Brendler 3/8/18
Farsheed Hamidi-Toosi Paul V 9/27/18
Tim Bielawa Paul V 9/27/18
Will Holland Ralph Brendler 10/4/18
Gwenn-Ael Lynn Ralph Brendler 10/4/18
Landon Smith Ralph Brendler 10/18/18
Will Brown Ralph Brendler 10/31/18
Tatjana Paunesku (tpaune) Ralph Brendler 11/29/18
Jim Lund Paul Van Lake 12/7/18
Deanna Musurlian Ralph Brendler 01/24/19
Pat Hillegass Ralph Brendler 1/24/19
Brian Barnt Ralph Brendler 02/07/19
Matt Dinning Ralph Brendler 02/07/19
Alex Biardo Paul Van Lake 03/01/19
Charlie Kepner Paul Van Lake 03/01/19
Tyler Moench Ralph Brendler 03/03/19
Tony Green Ralph Brendler 02/07/19
Craig Cernek Dave Solomon 03/27/19
Sean Blum Ralph Brendler 04/04/19
Maciej Warchalowski Paul V 04/10/19
Zach Graceffa Ralph Brendler 4/18/19
Chris Martin Ralph Brendler 05/02/19
David Pfeffer Paul V 05/24/19
Jack Gibbons Paul V 06/20/19
Tim Whelan Ralph Brendler 06/27/19
Patrick Cook Ralph Brendler 07/11/19
Matt Saunders Ralph Brendler 07/11/19
Nathan Upchurch Ralph Brendler 07/11/19
Luke Krudwig Ralph Brendler 07/11/19
Andrew Soghigian Ralph Brendler 07/11/19
Eric Kostecki Paul V 07/18/19
Michael Baker Paul V 07/18/19
Sarah Lu Ralph Brendler 07/25/19
Kevin Huemann Ralph Brendler 08/01/19
Connar Rosebraugh Ralph Brendler 08/01/19
Szymon Mirek David Earl 08/18/19
Hara Kumaran David Earl 08/18/19
Miles Hosanna Ralph Brendler 09/19/2019
Malindima Sampa Paul V 10/11/2019
Tony Vetter Michelle DeLeon 10/06/19
Adam Rangwala Ralph Brendler 11/14/19
Derek Smith Ralph Brendler 11/14/19
Adam Keim Ralph Brendler 11/14/19
Guillermo Tinoco David Earl 12/05/19
paulina hubli david earl 12/5/2019
Debbie Walker Michelle DeLeon 12/10/19
Ryan Zoghlin Paul V 1/14/2020