1,580
edits
Changes
Jump to navigation
Jump to search
Line 32:
Line 32: + + + + + + + + + Line 43:
Line 52: + + Line 50:
Line 61: − + − + + + + − − + − template at Joe's Adobe360 https://a360.co/2RdzuCe+ − keep spare plates in top drawer between bandsaw and lathe [TBD]+ Line 83:
Line 96: − Although wide blades are best for resawing, using 1" blades on the Rockwell is a challenge. The carter blade guides are difficult to adjust, and 1" is the borderline of their capacity. Adjust them so that the back of the blade runs against the support bearing, rather than digging into the frame of the blade guide. This adjustment is particularly difficult on the lower guide. If you do allow the blade to dig into the blade guide, it may be difficult to detect the mistake. The saw will run fine, even though the frame of the lower guide is pushing the blade forward. There won't necessarily be any telltale noises or tracking problems. The only indications of a problem may be that the back of the blade starts to get hot from friction and will discolor as it picks up resins from the wood. − − For even wider blades, it is necessary to remove the lower guide completely. Although not an ideal set-up, if the top guide is adjusted properly and the feed rate is reasonable, it cuts well. − {| class="wikitable" border="1"+ − ! Qualified Member + − ! Trained By − ! Date − |- − |Keon Turner − |Ron Olson − | − |- − |Hunter Koerner − |Eric Beauchamp − | − |- − |Deanna Williams − |Eric Beauchamp − | − |- − |Ray Doeksen − |Eric Beauchamp − | − |- − |Burton Kent − |Eric Beauchamp − | − |- − |Casey Olson − |Jason Shanfield − | − |- − |Tom Judge − |Matt Triano − | − |- − |Jeff Smykil − |(Pending confirmation) − | − |- − |Anna Yu − |Matt Triano − | − |- − |Jon Levine − |Jason Shanfield − | − |- − |Kyle Bieneman − |Eric Beauchamp − | − |- − |Niko Hawley − |Eric Beauchamp − | − |- − |Kevin Mitchell − |Eric Beauchamp − | − |- − |Adam Moffatt − |Jason Shanfield − | − |- − |Peter Letscher − |Eric Beauchamp − |11/05/15 − |- − |Glenn Trussell − |Eric Beauchamp − |11/05/2015 − |- − |Aaron Carlock − |Eric Beauchamp − |11/19/2015 − |- − |Patrick Lynch − |Eric Beauchamp − |11/19/2015 − |- − |Shine Chen − |Eric Beauchamp − |11/19/2015 − |- − |Mike Forkan − |Eric Beauchamp − |11/19/2015 − |- − |Ethan Sanders − |Eric Beauchamp − |11/19/2015 − |- − |Alex Al-Hamdan − |Eric Beauchamp − |12/04/2015 − |- − |Alvaro Caceres − |Eric Beauchamp − |12/03/2015 − |- − |Kevin Schwartzenberg − |Eric Beauchamp − |12/03/2015 − |- − |Marcin Ignasiak − |Eric Beauchamp − | − |- − |Thomas Ward − |Andy L. − |11/18/2015 − |- − |Kelly Steensma − |Eric Beauchamp − |11/19/2015 − |- − |Dan (Mike) Arwine − |Eric Beauchamp − |11/19/2015 − |- − |Connor Sullivan − |Eric Beauchamp − |1/8/2016 − |- − |Chris Kohl − |Eric Beauchamp − |1/8/2016 − |- − |Erik Funkhouser − |Ron Olson − |11/01/2015 − |- − |Peter Brask − |Eric Beauchamp − |1/14/16 − |- − |Andrew Dalesandro − |Eric Beauchamp − |1/14/16 − |- − |Shelly Loke-Gayares − |Eric Beauchamp − |1/14/16 − |- − |Saul Weiner − |Eric Beauchamp − |1/14/16 − |- − |Brandon Love − |Eric Beauchamp − |1/28/16 − |- − |Sam Paris − |Eric Beauchamp − |1/28/16 − |- − |Craig Koszewski − |Eric Beauchamp − |1/28/16 − |- − |Christopher Carson − |Eric Beauchamp − |2/25/16 − |- − |Jared K − |Andy L − |3/03/16 − |- − |Keith Couture − |Eric Beauchamp − |3/10/16 − |- − |Brian Cuocci − |Andy L − |3/17/16 − |- − |Julie Zwolinski − |Eric Beauchamp − |3/24/16 − |- − |Nick Puglisi − |Eric Beauchamp − |4/21/16 − |- − |Andy Muhic − |Andy Larkin − |4/28/16 − |- − |Colin Campbell − |Andy L − |5/5/16 − |- − |Ken Burkhardt − |Andy Larkin − |5/5/16 − |- − |Hans Griese − |Andy Larkin − |5/5/16 − |- − |Josh Younger − |Eric Beauchamp − |5/19/16 − |- − |Ian Monroe − |Eric Beauchamp − |5/19/16 − |- − |An Phan − |Andy Larkin − |7/7/16 − |- − |Donald Wells − |Andy Larkin − |8/4/16 − |- − |Derwin Umali − |Andy Larkin − |8/7/16 − |- − |[[User:mct|McTavish McArdle]] − |Andy Larkin − |2016-08-04 − |- − |Joe Dowling − |Ken Burkhardt − |8/15/16 − |- − |Leo Rodman − |Jason S − |9/12/16 − |- − |[[user:guijemont|Guillaume Emont]] − |Ken Burkhardt − |9/19/16 − |- − |Max Rashes − |Ken Burkhardt − |9/20/16 − |- − |Revant Ohri − |Andy L − |9/15/16 − |- − |Aaron Mintz − |Ken Burkhardt − |10/17/16 − |- − |Brian Carstensen − |Ken Burkhardt − |10/17/16 − |- − |Jon Komperda − |Ken Burkhardt − |10/17/16 − |- − |Regan Via − |Ken Burkhardt − |10/17/16 − |- − |Robert Richardson − |Ken Burkhardt − |10/17/16 − |- − |Ryan Fiebing − |Ken Burkhardt − |10/24/16 − |- − |Jack Berg − |Ken Burkhardt − |11/07/16 − |- − |Logan Price − |Andy Larkin − |11/21/16 − |- − |Kris Blouch − |Andy Larkin − |11/21/16 − |- − |Tony Iacullo − |Andy − |12/5/16 − |- − |Chris Ruhland − |Andy Larkin − |01/05/17 − |- − |John McBride − |Andy Larkin − |01/19/17 − |- − |Will Heil − |Andy Larkin − |01/19/17 − |- − |Dusty Buyck − |Andy Larkin − |01/19/17 − |- − |Bruce Mace − |Eric Beauchamp − |02/20/17 − |- − |Matthew Quigley − |Andy Larkin − |03/02/17 − |- − |W. Anthony Claypool − |Andy Larkin − |03/16/17 − |- − |Crystal Morales − |Andy Larkin − |2017-03-16 − |- − |Jason Pittman − |Andy Larkin − |2017-03-16 − |- − |Sam Chen − |Andy Larkin − | − |- − |Abel Greenwald − |Andy Larkin − | − |- − | [[User:Andrewvaughan|Andrew Vaughan]] − | Andy Larkin − | 2017-04-25 − |- − |Molly Adamski − |Ralph Brendler − |4/27/17 − |- − |Shabab Mustafa − |Ralph Brendler − |4/27/17 − |- − |Adomas Tautkus − |Ralph Brendler − |4/27/17 − |- − |Crystal Zapata − |Ralph Brendler − |4/27/17 − |- − |Alexa Viscius − |Ralph Brendler − |4/27/17 − |- − |David Earl − |Ralph Brendler − |5/4/17 − |- − |Paul McClay − |Ralph Brendler − |5/18/17 − |- − |Jim Handley − |Ralph Brendler − |5/13/17 − |- − |Luis Colmenares − |Ralph Brendler − |6/1/17 − |- − |Kari Danek − |Ralph Brendler − |6/15/17 − |- − |Christophe Laurent − |Ralph Brendler − |8/10/17 − |- − |[[User:spektre1|Danielle MacDonald]] − |Ralph Brendler − |2017-06-29 − |- − |Zack Sasnow − |Paul Van Lake − |8/3/2017 − |- − |Arjun Sharma − |Ralph Brendler − |8.10.17 − |- − |Justin Pestka − |Ralph Brendler − |8.30.17 − |- − |Sam Dreyer − |Ralph Brendler − |8/30/17 − |- − |[[User:Ekaj|Jacob Snyder]] − |Ralph Brendler − |9/7/17 − |- − |James Beck − |Ralph Brendler − |9/13/17 − |- − |Joanna C. − |Sam O. − |9/27/17 − |- − |Mark Haughey − |Sevin Straus − |9/30/17 − |- − |Jacqueline Villa − |Maria Miller − |10/3/17 − |- − |Mike Thariath − |Ralph Brendler − |10/19/17 − |- − |[[User:bnuttin|Benjamin Nuttin]] − |Ralph Brendler − |11/02/17 − |- − |Karl Healy − |Ralph Brendler − |11/2/17 − |- − |Tee − |Paul V − |11/09/17 − |- − |Nick Fera − |Paul V − |11/09/17 − |- − |[[User:frenchy|Jeremie Davis]] − |Ralph Brendler − |11/16/17 − |- − |[[User:wittnl|Nathan Witt]] − |Ralph Brendler − |11/30/2017 − |- − |Corey Toyama − |Ralph Brendler − |11/30/2017 − |- − |Theo T − |Ralph Brendler − |11/30/2017 − |- − |Wally Ibrahim − |Ralph Brendler − |11/30/17 − |- − |Jeff Hassberger − |Ralph Brendler − | − |- − |Wally Ibrahim − |Ralph Brendler − |11/30/17 − |- − |Mac MacDevitt − |Paul V − |12/7/17 − |- − |Ben Starett − |Ralph Brendler − |12/14/17 − |- − |Ross Hanchett − |Ralph Brendler − |12/14/17 − |- − |Michael Donovan − |Ralph Brendler − |12/14/17 − |- − |[[User:atomala|Alex Tomala]] − |Ralph Brendler − |12/21/17 − |- − |Jamin Nollsch − |Ralph Brendler − |12/28/17 − |- − |Chris Versteeg − |Ralph Brandler − |12/28/17 − |- − |Aaron Vander Bee − |Ralph Brandler − |1/11/18 − |- − |Ben Farmer − |Ralph Brendler − |1/11/18 − |- − |Joseph Crouch − |Ralph Brendler − |1/11/18 − |- − |Bradford Smith − |Ralph Brendler − |1/11/18 − |- − |Stephanie Pelzer − |Ralph Brendler − |1/11/18 − |- − |Amanda Assaley − |Ralph Brendler − |1/11/18 − |- − |Chris Eppig − |Ralph Brendler − |1/11/18 − |- − |Patrick Smith − |Ralph Brendler − |1/11/18 − |- − |Jeff Gershune − |Paul VanLake − |1/16/18 − |- − |Bryan Pennington − |Ralph Brendler − |1/25/18 − |- − |Michael Ice − |Ralph Brendler − |2/08/18 − |- − |Francisco becerril − |Ralph Brendler − |2/08/18 − |- − |Brandon Kennedy − |Ralph Brendler − |2/22/18 − |- − |Charles Barker − |Ralph Brendler − |3/8/18 − |- − |Dan Mach − |Ralph Brendler − |3/8/18 − |- − |Ricardo Staudt − |Ralph Brendler − |3/8/18 − |- − |Paul Graham − |Ralph Brendler − |3/22/18 − |- − |Mike Gucciard − |Ralph Brendler − |3/22/18 − |- − |[[User:waynr|Wayne Warren]] − |Ralph Brendler − |3/22/18 − |- − |Adam Hall − |Paul V − |3/29/18 − |- − |Bill Schroeder − |Ralph Brendler − |4/5/18 − |- − |Mike Wilkin − |Ralph Brendler − |4/19/18 − |- − |Alex Lanigan − |Ralph Brendler − |4/19/18 − |- − |Jessica Jokhi − |Ralph Brendler − |4/19/18 − |- − |Matt Maggio − |Ralph Brendler − |4/19/18 − |- − |Jonathan Frink − |Ralph Brendler − |4/19/18 − |-} − |Gary Newhouse − |Ralph Brendler − |4/19/18 − |-} − |Dave DesRoberts − |Paul Van Lake − |4/26/18 − |- − |Jennifer DesRoberts − |Paul Van Lake − |4/26/18 − |- − | Wayne Hendryx − | Ralph Brendler − | 4/19/18 − |- − |[[User:brendanf|Brendan Fortune]] − |Ralph Brendler − |5/17/18 − |- − | Fritz Sullivan − | Ralph Brendler − | 5/30/18 − |- − | Elizabeth Reuter − | Ralph Brendler − | 5/30/18 − |- − | Kirsten Landmark Masih − | Ralph Brendler − | 6/07/18 − |- − | Chris Niziolek − | Ralph Brendler − | 6/14/18 − |- − | Bob Fritz − | Ralph Brendler − | 6/14/18 − |- − | Nate Myren − | Ralph Brendler − | 6/14/18 − |- − | Eli Schlossberg − | Ralph Brendler − | 6/14/18 − |- − | Daniel Willmott − | Paul V − | 6/21/18 − |- − | Bruce Levin − | Paul V − | 7/05/18 − |- − | Joe Day − | Paul V − | 7/05/18 − |- − | Mike Yacobucci − | Ralph Brendler − | 7/12/18 − |- − | Kathryn Connolly − | Paul V − | 7/19/18 − |- − | Sam Lewis − | Paul V − | 7/19/18 − |- − | Aaron Hale − | Ralph Brendler − | 7/26/18 − |- − | Adam Wilk − | Ralph Brendler − | 7/26/18 − |- − | Geoff Klein − | Paul V − | 9/13/18 − |- − | Earl Wood − | Paul V − | 9/13/18 − |- − | Jacob Dawson − | Paul V − | 9/13/18 − |- − |Nick Prorok − |Ralph Brendler − |3/8/18 − |- − | Farsheed Hamidi-Toosi − | Paul V − | 9/27/18 − |- − | Tim Bielawa − | Paul V − | 9/27/18 − |- − | Will Holland − | Ralph Brendler − | 10/4/18 − |- − | Gwenn-Ael Lynn − | Ralph Brendler − | 10/4/18 − |- − | Landon Smith − | Ralph Brendler − | 10/18/18 − |- − | Will Brown − | Ralph Brendler − | 10/31/18 − |- − | Tatjana Paunesku (tpaune) − | Ralph Brendler − | 11/29/18 − |- − |Jim Lund − |Paul Van Lake − |12/7/18 − |- − |Deanna Musurlian − |Ralph Brendler − |01/24/19 − |- − |Pat Hillegass − |Ralph Brendler − |1/24/19 − |- − |Brian Barnt − |Ralph Brendler − |02/07/19 − |- − |Matt Dinning − |Ralph Brendler − |02/07/19 − |- − |Alex Biardo − |Paul Van Lake − |03/01/19 − |- − |Charlie Kepner − |Paul Van Lake − |03/01/19 − |- − |Tyler Moench − |Ralph Brendler − |03/03/19 − |- − |Tony Green − |Ralph Brendler − |02/07/19 − |- − |Craig Cernek − |Dave Solomon − |03/27/19 − |- − |Sean Blum − |Ralph Brendler − |04/04/19 − |- − |Maciej Warchalowski − |Paul V − |04/10/19 − |- − |Zach Graceffa − | Ralph Brendler − |4/18/19 − |- − |Chris Martin − |Ralph Brendler − |05/02/19 − |- − |David Pfeffer − |Paul V − |05/24/19 − |- − |Jack Gibbons − |Paul V − |06/20/19 − |- − |Tim Whelan − |Ralph Brendler − |06/27/19 − |- − |Patrick Cook − |Ralph Brendler − |07/11/19 − |- − |Matt Saunders − |Ralph Brendler − |07/11/19 − |- − |Nathan Upchurch − |Ralph Brendler − |07/11/19 − |- − |Luke Krudwig − |Ralph Brendler − |07/11/19 − |- − |Andrew Soghigian − |Ralph Brendler − |07/11/19 − |- − |Eric Kostecki − |Paul V − |07/18/19 − |- − |Sarah Lu − |Ralph Brendler − |07/25/19 − |- − |Kevin Huemann − |Ralph Brendler − |08/01/19 − |- − |Connar Rosebraugh − |Ralph Brendler − |08/01/19 − |- − |Szymon Mirek − |David Earl − |08/18/19 − |- − |Hara Kumaran − |David Earl − |08/18/19 − |- − |Miles Hosanna − |Ralph Brendler − |09/19/2019 − |- − |Malindima Sampa − |Paul V − |10/11/2019 − |- − |Tony Vetter − |Michelle DeLeon − |10/06/19 − |- − |Adam Rangwala − |Ralph Brendler − |11/14/19
Rockwell Delta 20" Bandsaw (view source)
Revision as of 18:36, 30 December 2020
, 18:36, 30 December 2020→List of Currently Authorized Users
* 10/13/19. Ralph discovered major bearing issues. Parts ordered.
* 10/13/19. Ralph discovered major bearing issues. Parts ordered.
* 11/2/2019. Ralph put it back into service with the great assistance of Jim brink
* 11/2/2019. Ralph put it back into service with the great assistance of Jim brink
* 12/29/2019 thrust bearings and guides failure
* 12/31/2019 Ralph replaced thrust bearings, guides and other pats top wheel bearing/shaft still needs work, but she's usable again
* 1/8/2020 blade badly kinked. person was sawing fresh bark-on logs. i spoke with him AFTER. gn
switched to fine blade. new 1/2 inch blade on wall hanger
*repaired.
* 2-15-20. Loud squealing noise. Out of order FIXED
== Authorization; How to get Authorized ==
== Authorization; How to get Authorized ==
Authorization for this tool by authorized proctors only. Members not previously authorized must take the CANVAS course at https://canvas.pumpingstationone.org/courses/40
*Authorizations for the 14" Rockwell do not carry over to this tool
*Authorizations for the 14" Rockwell do not carry over to this tool
=== Consumable Parts ===
=== Consumable Parts ===
* This saw takes 141" blades.
* This saw takes 141" blades.
* Throat plate. we still need this made frequently
* Thrust bearings type [https://www.mcmaster.com/5972k2 6203-2Z] (17mm x 40mm x 12mm). Be sure to get 2Z or ZZ (steel shield) and not 2RS (rubber shield).
templates courtesy of Joe Dowling
* Throat plate. We still need this made frequently
Throat plate templates/model courtesy of Joe Dowling
zip of SKP, STL and f3D files : [[File:Bandsaw Plate.zip]]
zip of SKP, STL and f3D files : [[File:Bandsaw Plate.zip]]
image[[Media:picofbandsawplate.jpg]] and
image [[Media:picofbandsawplate.jpg]] and
Fusion 360 model at Joe's Adobe360 https://a360.co/2RdzuCe
There is usually a spare plates in the locked cabinet
==Tips on Use==
==Tips on Use==
* Use a skip-tooth blade, at least 1" wide (but see note below).
* Use a skip-tooth blade, at least 1" wide (but see note below).
{{WoodshopProctors}}
{{WoodshopProctors}}
== List of Currently Authorized Users ==
== List of Currently Authorized Users ==
Authorization for this tool by authorized proctors only. Members not previously Authorized must take the CANVAS course at https://canvas.pumpingstationone.org/courses/40
[[Category:Wood Shop]]
[[Category:Wood Shop]]
[[Category:Shop Equipment]]
[[Category:Shop Equipment]]