* Throat plate. we still need this made frequently
+
* Thrust bearings type [https://www.mcmaster.com/5972k2 6203-2Z] (17mm x 40mm x 12mm). Be sure to get 2Z or ZZ (steel shield) and not 2RS (rubber shield).
−
templates courtesy of Joe Dowling
+
* Throat plate. We still need this made frequently
+
+
Throat plate templates/model courtesy of Joe Dowling
+
zip of SKP, STL and f3D files : [[File:Bandsaw Plate.zip]]
zip of SKP, STL and f3D files : [[File:Bandsaw Plate.zip]]
−
image[[Media:picofbandsawplate.jpg]] and
+
image [[Media:picofbandsawplate.jpg]] and
−
template at Joe's Adobe360 https://a360.co/2RdzuCe
+
Fusion 360 model at Joe's Adobe360 https://a360.co/2RdzuCe
−
keep spare plates in top drawer between bandsaw and lathe [TBD]
+
There is usually a spare plates in the locked cabinet
−
Thrust bearings are type [https://www.mcmaster.com/5972k2 6203-2Z] (17mm x 40mm x 12mm). Be sure to get 2Z or ZZ (steel shield) and not 2RS (rubber shield).