Difference between revisions of "Rockwell Hardness Tester"
Jump to navigation
Jump to search
(Created page with "{{Template:EquipmentPage |owner=PS:One |model=4M |serial=4MM 344 |arrived=Summer, 2015 |doesitwork=yes |contact=Everett Wilson |where=Machine Shop, on a bench |certification=y...") |
(No difference)
|
Revision as of 19:22, 31 October 2015
 | |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | 4MM 344 |
| Make/Model | 4M |
| Arrival Date | Summer, 2015 |
| Usability | yes |
| Contact | Everett Wilson |
| Where | Machine Shop, on a bench |
| Authorization Needed | yes |
| Hackable | no |
| Estimated Value | $500 |
| Host Area | Coldmetals |
| Qualified Member | Trained By |
|---|---|
| Dean Anderson | Danger committee |
| Everett Wilson | Danger committee |
Notes
As of October 2015, the machine shop doesn't have a diamond indenter for the Rockwell C scale -- but we do have spherical indenters for Rockwell B.
Keep the dust cover on. Use calibration discs if you care about your results.