Difference between revisions of "Rockwell drill press"

From Pumping Station: One Wiki
Jump to: navigation, search
(Auth/Use Notes)
Line 35: Line 35:
 
Only use drills and accessories with correct shank taper and tang
 
Only use drills and accessories with correct shank taper and tang
  
 
+
Be sure the e-stop (big red button) is in the out position by twisting the button counterclockwise.  This must be done before turning on the power, otherwise the spindle will not operate.
 +
 
 +
Authorizations from the old DoAll drill press carry over to this machine.
  
 
 
== To-Do ==
 
== To-Do ==
  

Revision as of 12:20, 23 March 2017


Rockwell drill press
Owner/Loaner PS:One
Serial Number 1456658
Make/Model Rockwell 17-600 17" Drill Press
Arrival Date December 2016
Usability yes
Contact Dean Anderson
Where Cold Metals
Authorization Needed yes
Hackable no
Estimated Value $500
Host Area {{{hostarea}}}


Rockwell drill press Area: {{{hostarea}}} https://wiki.pumpingstationone.org/Rockwell_drill_press




Specifications

17" capacity (from the center of the spindle to the column).

VFD controlled 3 phase motor. Continuously variable spindle speed from 250-??.

Morse #2 taper spindle

Capacity, mild steel 1/2"

Drills to center 17"

approximate weight ?? pounds

motor HP 1


Auth/Use Notes

These notes are for reference after authorization by a person.

Only use drills and accessories with correct shank taper and tang

Be sure the e-stop (big red button) is in the out position by twisting the button counterclockwise. This must be done before turning on the power, otherwise the spindle will not operate.

Authorizations from the old DoAll drill press carry over to this machine.

To-Do

Maintenance

Equipment

References

List of Currently Authorized Users

Qualified Member Trained By Date Trained
Dean Anderson
Everett Wilson Dean Anderson
Bruce Mace Chris Ruhland 3/7/17