Domain Admins
586
edits
Changes
Jump to navigation
Jump to search
Line 38:
Line 38: − + − + − + − + − + − + − + +
→Auth/Use Notes
The motor direction is reversible using a switch on the back of the control box. For nearly all drills, the spindle must rotate clockwise when viewed from above.
The motor direction is reversible using a switch on the back of the control box. For nearly all drills, the spindle must rotate clockwise when viewed from above.
Setup material securely on the table.
Operation:
Turn e-stop counter clockwise
# Setup material securely on the table. Be sure the drill will not drill into the table.
Turn on power switch on the back of the control box
# Turn e-stop counter clockwise
Set the RPM based on the material being drilled and the drill diameter.
# Turn on power switch on the back of the control box
Set the direction switch on the back of the control box to 'forward'.
# Set the RPM based on the material being drilled and the drill diameter.
Move the spindle switch to 'on' when you are ready to drill.
# Set the direction switch on the back of the control box to 'forward'.
To turn off, push the e-stop or flip the spindle switch.
# Move the spindle switch to 'on' when you are ready to drill.
# To turn off, push the e-stop or move the spindle switch to the 'off' position.
== To-Do ==
== To-Do ==