Sherline 8 inch lathe + milling column

Sherline 8 inch lathe + milling column

Owner/Loaner	PS:One
Make/Model	Sherline 4530 + 3485 + more
Arrival Date	2017
Usability	yes
Contact	Paul McClay / Jim Brink
Where	Cold Metals across from the Shapeoko (needs metal-related landmark...)
Authorization Needed	yes
Hackable	no
Estimated Value	$1500
Host Area	Cold Metals

larval tool page blather

Ralph Brendler very generously donated this "full Sherline clockmaking (metric) setup with all the trimmings (rotating table, change gears, milling column, and lots more)". Apparently in 2017. Time passed. Per area host Jim Brink, Paul is "danger committee of one" checking it out and trying to get it online. This is a start at documenting the tool and determining what authorization it may or may not require. Eventually this blathery part will go away.

Inventory

	Sherline
Component	SKU	PDF	Fiddlybits	Note
8" Lathe with Adjustable Handwheels (Metric)	4530	PDF	faceplate + lathe dog #0 and #1 Morse dead centers 3/32", 1/8" & 5/32" hexagonal keys Tommy Bar Head Alignment Key tool post assembly	looks complete morse #1 rusty
Lathe Deluxe Vertical Milling Column (Metric)	3485	PDF	Head Alignment Key	Deluxe = adjustable "zero" handwheels
2.5” 3-Jaw Chuck	1041	PDF	2x Tommy Bars
Headstock Riser Block Set	1291	PDF	missing Head Alignment Key Tool Rocker	Includes 1297 Headstock Spacer/Riser and 1288 Riser Rocker Tool Post
Clockmaker’s Gear-cutting Arbor (7.0mm to #1 Morse taper)	2094	PDF		use with drawbolt? (not included)
Gear Cutters
Crosslide Accessory Plate	3017	PDF	4x (Sherline T-nut + 10/32 x 3/8" SHC screw)	stiffens thin lathe crosslide for milling
Slitting Saw Holder	3065	PDF	missing drawbolt+washer
Slitting Saw [which one?]	730x	PDF
End Mill Holder (3/8")	3079	PDF	Tommy Bar
Thread Cutting Attachment	3100	PDF	legion	complete as of late 2019; some parts installed in lathe base; dis/engage action not free; really wants some way to manage many parts
Mill Vise	3551	PDF	2x (Sherline T-nut + clamp + 10-32 x 5/8" SHC screw)
Manual Rotary Table	3700	PDF	Chuck Adapter (3/4"-16 thread) 2x (Sherline T-nut + clamp + 10-32 x 5/8" SHC screw) 2x (Sherline T-nut + 10-32 x 1/2" SHC screw) missing 4x (10-32 x 3/16" set screw) present?/missing? Hold Down Tab + 2x (10-32 x 3/8" SHC screw)	See extensive instruction PDF Install 4x set screws keep swarf out of worm mechanism when not mounted on right angle adapter Hold Down Tab may be screwed to worm housing for horizontal use or removed for vertical use
Right Angle Attachment (for rotary table)	3701	PDF	4x (Serline T-nut + 10-32 x 1/2" SHC screw) missing one 4x (10-32 x 3/8" SHC screw) ?all present? 10/32 x 3/8" set screw 10-32 x 1" SHC screw
1/4" Drill Chuck with 2 Arbors	1072	PDF	Threaded #0M arbor Threaded #1M arbor drawbolt+washer Chuck key, 1/4" drill chuck	conjectural - because have #0 arbor & 1/4in chuck key; if so, missing chuck, #1 arbor and drawbolt
more				missing: one Alignment Key, some Sherline-special T-nuts missing, drawbolts, ?set screws?; only need one drawbolt+washer but have zero (bolt is a bolt but washer is special)