4
edits
Changes
Jump to navigation
Jump to search
Line 9:
Line 9: − + − + − + − + − + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 41:
Line 72: + + + + + + − + − + − + Line 57:
Line 94: + + + + Line 64:
Line 105: + − + − + + + + + + + + + Line 72:
Line 122: − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − Add your experiences with feeds and speeds or other tips here.+ − https://wiki.pumpingstationone.org/Shopbot_User_Tips − + − https://wiki.pumpingstationone.org/Shopbot_Troubleshooting_Reports+ + + + Line 92:
Line 194: − + − + + Line 184:
Line 287: − + + + + + + Line 193:
Line 301: − + − + + − + − + − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + − + + + + + + + + + + + + + + + + + + + + − + + − + + − + + + + + + + + + + + + + + + + + + + + − |}+ − + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Line 443:
Line 1,224: + + + + + Line 465:
Line 1,251: − − === Automatic Dust Collection === − The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.) Line 475:
Line 1,258: − + + +
→List of Currently Authorized Users
|doesitwork = yes
|doesitwork = yes
|contact = [[CNC|CNC Area Host]]
|contact = [[CNC|CNC Area Host]]
|where = TBD
|where = Wood Shop
|value = $16000
|value = $16000
|hostarea = CNC
|hostarea = CNC
}}
}}
= Shopbot PRS #10108 96-48 =
= ShopBot PRS #10108 96-48 =
http://www.shopbottools.com/mProducts/prSstandard.htm
Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]
Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)
* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)
= Authorization for this tool by authorized proctors only =
* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)
== Authorized Proctors ==
* Max spindle speed: 18000 RPM
* Min spindle speed: 4100 RPM
The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.
Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:
* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]
* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]
* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]
* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]
* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]
=Status=
June 2020: Keyed switch replaced.
August 2017: Dust collection system out of commission.
June 2017: There is an intermittent break in the wiring for the Z-axis Zero Plate. Check for continuity before using (the #1 input should light up on screen when you touch the contacts together). It usually works near the front of the table, but not halfway back. This will get fixed eventually, but it's a good idea to be in the habit of checking.
12/27/16 - Fixed Shopbot x-axis homing. The cable had been pulled on hard enough that some of the conductors broke inside the cable. It has been spliced, soldered, and heatshrinked back together.
= How to Get Authorized =
'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.
Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask the [[CNC Area Host]] or on the [https://groups.google.com/group/pumping-station-one/ Google Group].
Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.
== Authorizers ==
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
|Andrew Camardella
|Andrew Camardella
|Elizabeth Koprucki
|Elizabeth Koprucki
|-
|Matt Meshulam
|Andrew Camardella
|-
|David Earl
|Matt Meshulam
|-
|-
|}
|}
== How to Become an Authorized Proctor ==
== How to Become an Authorizer ==
Get an ok from the area host. Successfully run an authorization supervised by an authorized proctor.
Get an ok from the area host. Successfully run an authorization supervised by an authorizer.
It's recommended that initial authorizations be limited to 2 or less.
It's recommended that initial authorizations be limited to 2 member participants or less.
= Documentation =
= Documentation =
[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]
[[File:PRS Maintenance Schedule.pdf|Maintenance Schedule]]
[[File:ShopBot_USB_Connection_Troubleshoot.pdf]] - USB Troubleshooting Guide
[[File:ShopBot_Tech_Support_FAQ_2016_09_12.pdf]] - Tech Support FAQ
[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide
[[File:SBG00142 User Guide 2013 05 01.pdf|SBG00142 User Guide 2013 05 01.pdf]] - User Guide
[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]
[http://www.shopbottools.com/ShopBotDocs/files/quick%20start%20guide%202013%2007%2023.pdf QuickStart]
X, Y, Z probe: https://pumpingstationone.org/2015/09/xyz-finder-for-the-shopbot/
= Tutorials =
[http://drshopbot.com/index.php?title=Main_Page "Dr Shopbot" wiki]
[http://academy.cba.mit.edu/content/tutorials/akf/Downloads/ShopBot%20Trainings/router_bit_basics.pdf Router Bit Basics for CNC]
[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]
[[File:Shopbotmagnets.ai.zip]] - Template for the dust skirt and magnet placement.
== Tutorials ==
[https://www.youtube.com/watch?v=xWCZfYHOYWw Part 1 of our Shopbot Authorization] - This is available as a refresher only. You still need to go to the class when it happens to get access to the hands-on Part 2.
[http://www.woodguide.org/files/2014/07/CNCrouter_bit_basics.pdf Router Bit Basics for CNC - VERY USEFUL]
[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]
[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Threads on Member List]
[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]
[https://groups.google.com/forum/?fromgroups=#!searchin/pumping-station-one/shopbot Shopbot Forum]
[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overvies of Cut Load calcualtions for setting bit feed and speed rates]
[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]
Vertanux1: This user teaches at Elgin Community College and has very good tutorials and downloadable textbook on Autodesk Inventor (which applies to Fusion 360 as well: http://www.vertanux1.com/ and https://www.youtube.com/user/vertanux1?reload=9
Online chipload calculator: https://www.guhdo.com/chipload-calculator
Fusion 360 Videos
NYC CNC - Several videos that provide an overview of downloading software, preferences, and basic sketch terms and steps. https://www.nyccnc.com/fusion-360/
Lars Christensen - CAD/CAM instructor hired by Autodesk to produce their Fusion 360 videos. The Absolute Basics and #LarsLive series are worth watching. https://www.youtube.com/watch?v=A5bc9c3S12g&feature=youtu.be
Maker's Muse CAD for Newbies Series - Provides a detailed overview of sketch dimensions, constraints, revolving, sweeping, and lofting, among many other topics. https://www.youtube.com/playlist?list=PLTCCNNvHC8PC40tcEqaJcgUMb97LNkLIn
Krenov Coffee Table - A fantastic overview of the design of a coffee table from scratch. Lots of CAD best practices. https://www.youtube.com/watch?v=J22j8RfETjs&feature=youtu.be
Fusion 360 V12 Engine - A long playlist series on a complex topic that demonstrates how powerful real CAD software can be. https://www.youtube.com/playlist?list=PLQl9vsO6sGSlasKFP-CAgnDs324Z6IW8s
= Software Tool Chain =
*Illustrator
*Inkscape
*Vectric Aspire
**Allows for 2D and 3D linework and toolpath creation
**Only available on the Shapeoko Computer
*Vectric V-Carve Makerspace Edition Version 9.0 (earlier versions may not be supported here anymore)
** http://www.vectric.com/products/vcarve/trial.html
**Allows for 2D linework and toolpath creation
**Allows at home use of V-Carve - output only at PS1
**Our Makerspace Code is: E4793-F6472-BB9E5-9B114-3FEEB-73649-16F4F
*Autodesk Fusion 360
**The ShopBot computer does not have this and may not be fast enough to run it.
**You '''MUST''' use the custom post-processor below. Otherwise, you will bypass the safety check to make sure the spindle really is running!
**For local '''Windows''', to install this on your local computer:
***Unzip and install this in C:\Users\YourName\AppData\Roaming\Autodesk\Fusion 360 CAM\Posts
***Note that AppData is often a hidden folder!
***Inside Fusion 360, when you select Actions / Post Process, under Configuration Folder, hit Setup and select Use Personal Posts.
**For local '''Mac'''
*** Unzip and install in Macintosh HD> Users> USERNAME> Autodesk> Fusion 360 CAM> Posts
*** In Fusion 360, when you select Actions > Post Process, under Settings select Personal Posts for the Source
**For '''Cloud'''
*** Open Fusion 360 and navigate to Libraries > Assets in the Data Panel.
*** Double click the Assets > CAMPosts folder to enter it.
*** Use the Upload button to upload the desired post processor from your local machine to the Assets > CAMPosts folder. This will upload the post to the cloud and allow you to access it anywhere you may login to your Fusion 360 account through My Cloud Posts.
*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).
====Chip Load Calculation====
*[https://www.guhdo.com/chipload-calculator Chip Load Calculator by Guhdo]
*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]
*[https://www.monstertool.com/29/tech-data.htm Monster Tools Chip Load Calculator]
*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]
*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]
== User Tips & Troubleshooting Reports ==
== User Tips & Troubleshooting Reports ==
[http://www.sgstool.com/PDF-speedfeeds/SGS-Speeds-Feeds-GP.pdf Some feed and speed recommendations for small bits]
Add troubleshooting reports here
Add your experiences with feeds and speeds or other tips here:
[[Shopbot_User_Tips]]
Add troubleshooting reports here:
[[Shopbot_Troubleshooting_Reports]]
=== Materials ===
=== Materials ===
* How to get authorized
* How to get authorized
** Watch [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on that forum if no announcements have been made for a few weeks.
** Watch [http://www.meetup.com/Pumping-Station-One/ the meetup group] for a recurring class on the second Thursday and last Sunday of the month. Sometimes check [https://groups.google.com/forum/#!forum/pumping-station-one the forum] for announcements or ask on the forum if no announcements have been made for a few weeks.
* Authorization group size
* Authorization group size
** About 4 (each person will run a job)
** There is no cap to the software instruction preceding the machine usage portion of the class. If you come to this portion it is easier to get fully authorized at a later date.
** 3 machine users - each person will run a job (~1/2 hr each) and everyone will assist each other in completing a job profile and pocket cut. You must be present for the entire authorization
* Safety
* Safety
** Post a picture on our [[Blog]] please!
** Post a picture on our [[Blog]] please!
== Pre-Flight Checklist ==
== Use checklist ==
PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1zxrvQX0DXaLxaXkaKCKpZ-PAgnDak6ezKKBkdu_Fw1U/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.
Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:
* Did you home the machine?
* Did you home the machine?
* Is the dust collect gate open?
* Is the dust collect gate open?
* Is the dust skirt set right so it does not get smashed.
* Is the dust skirt set right so it does not get smashed.
* Is Z zero set to the work top?
* Is Z zero set to the work top?
* Is the touch plate and clip returned.
* Are the touch plate and clip returned?
* Is the material properly secured
* Is the material properly secured?
* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)
* Safety glasses, hearing protection on.
* Safety glasses, hearing protection on.
* Start the job with the E-Stop ready to hit.
* Start the job with the E-Stop ready to hit.
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)
* Turn on dust collector ( I like to wait so I can hear that things sound right on the shopbot before turning on the collector)
= Authorized Users =
== List of Currently Authorized Users ==
{| class="wikitable" border="1"
{| class="wikitable" border="1"
! Authorized Member
! Qualified Member
! Trained By
! Trained By
! Date
|-
|-
|Elizabeth Koprucki
|Elizabeth Koprucki
|Danger Committee
|Danger Committee
|
|-
|-
|Bart Dring
|Bart Dring
|Danger Committee
|Danger Committee
|
|-
|-
|Ryan Pierce
|Ryan Pierce
|Danger Committee
|Danger Committee
|
|-
|-
|Nathan Ellis
|Nathan Ellis
|Danger Committee
|Danger Committee
|
|-
|-
|Michael Skilton
|Michael Skilton
|Danger Committee
|Danger Committee
|
|-
|-
|Arturo Duarte
|Arturo Duarte
|Bart
|Bart
|
|-
|-
|Derek Bever
|Derek Bever
|Bart
|Bart
|
|-
|-
|Everett
|Everett
|Bart
|Bart
|
|-
|-
|Vincent Colombo
|Vincent Colombo
|Bart
|Bart
|
|-
|-
|[[User:justin|Justin T. Conroy]]
|[[User:justin|Justin T. Conroy]]
|Bart
|Bart
|
|-
|-
|Hugh Sato
|Hugh Sato
|Bart
|Bart
|
|-
|-
|Sergey Nekrasov
|Sergey Nekrasov
|Bart
|Bart
|
|-
|-
|Valerie Moore
|Valerie Moore
|Bart
|Bart
|
|-
|-
|Patrick Schless
|Patrick Schless
|Bart
|Bart
|
|-
|-
|Tom Forajter
|Tom Forajter
|Bart
|Bart
|
|-
|-
|Todd Allen
|Todd Allen
|Michael Skilton
|Michael Skilton
|
|-
|-
|[[User:RogerMoore|Roger Moore]]
|[[User:RogerMoore|Roger Moore]]
|Bart
|Bart
|
|-
|-
|Tim Saylor
|Tim Saylor
|Bart
|Bart
|
|-
|-
|Hef
|Hef
|Bart
|Bart
|
|-
|-
|Jeff McBride
|Jeff McBride
|Bart
|Bart
|
|-
|-
| Maxwell ?
| Maxwell ?
| Michael Skilton
| Michael Skilton
|
|-
|-
|Samuel Swope
|Samuel Swope
|Michael Skilton
|Michael Skilton
|
|-
|-
| Khoi Nguyen
| Khoi Nguyen
|Michael Skilton
|Michael Skilton
|
|-
|-
|Brian Chojnowski
|Brian Chojnowski
|Michael Skilton
|Michael Skilton
|
|-
|-
|Josh Cooper
|Josh Cooper
|Bart
|Bart
|
|-
|-
|Andrew Camardella
|Andrew Camardella
|Bart
|Bart
|
|-
|-
|Adam Glick
|Adam Glick
|Bart
|Bart
|
|-
|-
|Yehuda Braun
|Yehuda Braun
|Bart
|Bart
|
|-
|-
| Jeff Kantarek
| Jeff Kantarek
| Michael Sklton
| Michael Sklton
|
|-
|-
| Justin Miles
| Justin Miles
|Michael Skilton
|Michael Skilton
|
|-
|-
|Will Garza
|Will Garza
|Michael Skilton
|Michael Skilton
|
|-
|-
|Clarence Risher
|Clarence Risher
|Michael Skilton
|Michael Skilton
|
|-
|-
|[[User:ericbeau|Eric Beauchamp]]
|[[User:ericbeau|Eric Beauchamp]]
|Michael Skilton
|Michael Skilton
|
|-
|-
|[[User:Jason|Jason]]
|[[User:Jason|Jason]]
|Michael Skilton
|Michael Skilton
|
|-
|-
|Eric Stein
|Eric Stein
|Bart
|Bart
|
|-
|-
|Colin Parsons
|Colin Parsons
|Bart
|Bart
|
|-
|-
|David Ditzler
|David Ditzler
|Bart
|Bart
|
|-
|-
|Ray Doeksen
|Ray Doeksen
|Bart Dring
|Bart Dring
|
|-
|-
|Ron Bean
|Ron Bean
|Khoi Nguyen & Michael Skilton
|Khoi Nguyen & Michael Skilton
|
|-
|-
| Thomas Wright
| Thomas Wright
|Khoi Nguyen & Michael Skilton
|Khoi Nguyen & Michael Skilton
|
|-
|-
|David Morton
|David Morton
|Bart Dring
|Bart Dring
|
|-
|-
|Ron Olson
|Ron Olson
|Bart Dring
|Bart Dring
|
|-
|-
|Kyle Bieneman
|Kyle Bieneman
|Bart Dring
|Bart Dring
|
|-
|-
|[[User:amishhammer|Tom Judge]]
|[[User:amishhammer|Tom Judge]]
|Michael Skilton
|Michael Skilton
|
|-
|-
|Bryan Gleason
|Bryan Gleason
|Michael Skilton
|Michael Skilton
|
|-
|-
|Dave Schact
|Dave Schact
|Ryan Pierce
|Ryan Pierce
|
|-
|-
|Chris Agocs
|Chris Agocs
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|[[user:kuroishi | Doorman Dave ]]
|[[user:kuroishi | Doorman Dave ]]
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Alec Weege
|Alec Weege
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Sam Reicks
|Sam Reicks
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Touly Phiachantharath
|Touly Phiachantharath
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Lucas Goossen
|Lucas Goossen
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|[[user:Tina|Tina C]]
|[[user:Tina|Tina C]]
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Ryan Neuman
|Ryan Neuman
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Dan Loeser
|Dan Loeser
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Ben Bogler
|Ben Bogler
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Erin Banwell
|Erin Banwell
|Ryan Pierce
|Ryan Pierce
|
|-
|-
|Brad Rios
|Brad Rios
|Ryan Pierce
|Ryan Pierce
|
|-
|-
|Aaron Carlock
|Aaron Carlock
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|James Villalpando
|James Villalpando
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Connor Jansen
|Connor Jansen
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Tait Leswing
|Tait Leswing
|Bart
|Bart
|
|-
|-
|Raj Perera
|Raj Perera
|Khoi Nguyen
|Khoi Nguyen
|
|-
|-
|Keith Hultman
|Keith Hultman
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|David Srebro
|David Srebro
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|[[user:Wessing | Erik Wessing ]]
|[[user:Wessing | Erik Wessing ]]
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Leeswann Bolden
|Leeswann Bolden
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Josh Myers
|Josh Myers
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Kurt Ziegel
|Kurt Ziegel
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Glenn Powers
|Glenn Powers
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|[[User:mqudsi|Mahmoud Al-Qudsi]]
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Casey Olson
|Casey Olson
|Khoi
|Khoi
|
|-
|-
|Mike Jones
|Mike Jones
|Andrew Camardella
|Andrew Camardella
|
|-
|Aaron Feigen
|Andrew Camardella
|
|-
|-
|Jim Baker
|Jim Baker
|Andrew Camardella
|Andrew Camardella
|
|-
|-
|Eric Reusche
|Eric Reusche
|Khoi Nguyen
|Khoi Nguyen
|
|-
|-
|Ralph Brendler
|Ralph Brendler
|Andrew Camardella
|Andrew Camardella
|
|-
|John McDonald
|Andrew Camardella
|
|-
|Alex Al-Hamdan
|Andrew Camardella
|
|-
|Eugene Liokumovich
|Andrew Camardella
|
|-
|Randal Cox
|Andrew Camardella
|
|-
|Simon Pyle
|Andrew Camardella
|
|-
|Jean Michel Crettaz
|Andrew Camardella
|
|-
|Brian Zable
|Andrew Camardella
|
|-
|Daylan Dufelmeier
|Andrew Camardella
|
|-
|Steve Kruse
|Matt Meshulam
|
|-
|Mike Mandrea
|Andrew Camardella
|
|-
|Jeff Zelnio
|Andrew Camardella
|
|-
|Aaron Stoddart
|Matt Meshulam
|
|-
|Koun Park
|Matt Meshulam
|
|-
|Dan Baltudis
|Matt Meshulam
|
|-
|Curtiss Cooke
|Matt Meshulam
|
|-
|Jeannine Chuchan
|Matt Meshulam
|
|-
|Brennan Koziarz
|Matt Meshulam
|
|-
|Brandon Love
|Matt Meshulam
|
|-
|Mike Vitale
|Matt Meshulam
|
|-
|Emma Purola
|Matt Meshulam
|
|-
|Chris Kohl
|Matt Meshulam
|
|-
|Daniel Sojka
|Matt Meshulam
|
|-
|Naguib Azab
|Matt Meshulam
|
|-
|Mark Zumwalt
|Matt Meshulam
|
|-
|Joseph Juhnke
|Andrew Camardella
|
|-
|Alex Berkowitz
|Andrew Camardella
|
|-
|Andy Muhic
|Matt Meshulam
|
|-
|Adam Stein
|Matt Meshulam
|
|-
|John Farmer
|Matt Meshulam
|
|-
|Joshua Havenga
|Matt Meshulam
|
|-
|[[user:mct|McTavish McArdle]]
|Matt Meshulam
|
|-
|Frank Bowles
|Matt Meshulam
|
|-
|Joe Iklov
|Matt Meshulam
|
|-
|Matthew Quigley
|Matt Meshulam
|
|-
|Derwin Umali
|Andrew Camardella
|
|-
|Doug Mahoney
|Matt Meshulam
|
|-
|Rob Robinson
|Matt Meshulam
|
|-
|Dan Sloboda
|Matt Meshulam
|
|-
|Jacob Collins
|Matt Meshulam
|
|-
|Donald Wells
|Matt Meshulam
|
|-
|[[user:jim|Jim Brink]]
|Matt Meshulam
|
|-
|[[user:mkeith|Matt Keith]]
|Matt Meshulam
|
|-
|[[user:vmorris|Victoria Morris]]
|Matt Meshulam
|
|-
|[[user:bobsabayesian|Bob Loos]]
|Matt Meshulam
|
|-
|[[user:muthpete|Peter Muth]]
|Matt Meshulam
|
|-
|[[user:guijemont|Guillaume Emont]]
|Matt Meshulam
|
|-
|[[user:erikthefunk|Erik Funkhouser]]
|Matt Meshulam
|
|-
|[[user:mrashes|Max Rashes]]
|Matt Meshulam
|
|-
|[[user:panchan99|Juan Ramos]]
|Matt Meshulam
|
|-
|[[user:Justjoe|Joe Dowling]]
|Matt Meshulam
|
|-
|[[user:smash|Ashley Matrisciano]]
|Matt Meshulam
|
|-
|Ryan Kapp
|Matt Meshulam
|
|-
|Idris Raja
|Matt Meshulam
|
|-
|[[user:Dannyblanchard|Danny Blanchard]]
|Matt Meshulam
|
|-
|Aaron Mintz
|Matt Meshulam
|
|-
|[[user:ianstubbs|Ian Stubbs]]
|Matt Meshulam
|
|-
|[[user:skynaya|Sky Nova]]
|Matt Meshulam
|
|-
|Chris Ruhland
|Matt Meshulam
|
|-
|[[user:Jaypee|Jay Pee]]
|Matt Meshulam
|
|-
|[[user:Ryanmafi|Ryan Fiebing]]
|Matt Meshulam
|
|-
|[[user:sblaszak|Shawn Blaszak]]
|Matt Meshulam
|
|-
|[[user:tonyiacullo|Tony Iacullo]]
|Matt Meshulam
|
|-
|Mark Haughey
|Matt Meshulam
|
|-
|Chris Iacullo
|Matt Meshulam
|
|-
|Ian Monroe
|Matt Meshulam
|
|-
|Ashish Jasani
|Matt Meshulam
|
|-
|Kurt Gilman
|Matt Meshulam
|
|-
|Abel Greenwald
|Matt Meshulam
|
|-
|Vaidotas (Vai) Staugaitis
|Matt Meshulam
|
|-
|Leo Battikhi
|Matt Meshulam
|
|-
|Matt Schaid
|Matt Meshulam
|
|-
|Jamie Vollmer
|Matt Meshulam
|
|-
|Bhairavi Warke
|Matt Meshulam
|
|-
|Denis Kuznetsov
|Matt Meshulam
|
|-
|Brian Carstensen
|Matt Meshulam
|
|-
|Rob Dumas
|Matt Meshulam
|
|-
|Mark Weiser
|Matt Meshulam
|
|-
|Tom Burtonwood
|Matt Meshulam
|
|-
|Steve Madonna
|Matt Meshulam
|
|-
|Jason Araujo
|Matt Meshulam
|
|-
|Bruce Alan Mace
|Matt Meshulam
|
|-
|Molly Adamski
|Matt Meshulam
|
|-
|Jeremy Shaw
|Matt Meshulam
|
|-
|Sam Chen
|Matt Meshulam
|
|-
|John McBride
|Matt Meshulam
|
|-
|Adomas Tautkus
|Matt Meshulam
|
|-
|Tim Buckley
|Matt Meshulam
|
|-
|Martina Josimovska
|Matt Meshulam
|
|-
|James Jacobs
|Matt Meshulam
|
|-
|George Shaw
|Matt Meshulam
|
|-
|David Earl
|Matt Meshulam
|
|-
|[[User:pedrosk| Eduard Breuer]]
|Matt Meshulam
|
|-|-
|Matthew Kim
|Matt Meshulam
|
|-
|Corey Peoples
|Matt Meshulam
|
|-
|Paul Graham
|Matt Meshulam
|
|-
|Matt Grunstad
|Matt Meshulam
|
|-
|Rolf Scheidt
|Matt Meshulam
|
|-
|Arjun Sharma
|Matt Meshulam
|
|-
|Chris Laurent
|Matt Meshulam
|
|-
|[[User:dwlocks|Dan Locks]]
|Matt Meshulam
|
|-
|Zack Sasnow
|Matt Meshulam
|
|-
|Ben Stringer
|Matt Meshulam
|
|-
|[[User:Ekaj|Jacob Snyder]]
|Matt Meshulam
|8/24/17
|-
|James Beck
|Matt Meshulam
|9/13/17
|-
| Sam Gates
|Matt Meshulam
|10/01/17
|-
| Tommy TBones Cramer
|Matt Meshulam
|09/24/17
|-
| tee
|Matt Meshulam
|10/26/17
|-
|[[User:wittnl|Nathan Witt]]
|Matt Meshulam
|2017-12-09
|-
|[[User:GalaxyCascade|Steve Griegoliet]]
|Matt Meshulam
|12/09/17
|-
| Chinbayar Davaatseren
| Matt Meshulam
| 12/09/17
|-
|Theo T
|David Earl
|1/20/18
|-
|[[User:Frenchy|Jeremie Davis]]
|David Earl
|1/21/18
|-
|Armani Barron
|Matt Meshulam
|9/16/17
|-
|Scott Fullman
|David Earl
|02/24/18
|-
|Michael Donovan
|David Earl
|03/04/2018
|-
|Damon Carrvesco
|David Earl
|03/26/2018
|-
|Ryan Kelly
|David Earl
|03/26/2018
|-
|Will Coffin
|David Earl
|03/26/2018
|-
|Shabab Mustafa
|David Earl
|03/26/2018
|-
|Bruce Mace
|David Earl
|03/26/2018
|-
|Shahnawas Khokhar
|David Earl
|03/26/2018
|-
|Seth Cothron
|David Earl
|04/22/2018
|-
|Matthew Currey
|David Earl
|04/22/2018
|-
|Adam Hall
|David Earl
|04/29/2018
|-
|Kevin Huemann
|David Earl
|04/29/2018
|-
|Donzell Gordon
|David Earl
|04/28/2018
|-
|Nelson Reyes
|David Earl
|05/26/2018
|-
|David DesRoberts
|David Earl
|05/26/2018
|-
|Brendan Fortune
|David Earl
|06/02/2018
|-
|Chris Albert
|David Earl
|06/17/2018
|-
|Nate Myren
|David Earl
|06/23/2018
|-
|Eli Scholssberg
|David Earl
|06/23/2018
|-
|Szymon Mirek
|David Earl
|06/24/2018
|-
|Dan Willmott
|David Earl
|06/24/2018
|-
|Mark Treiber
|David Earl
|10/28/2018
|-
|Charlie Kepner
|David Earl
|02/20/2019
|-
|Kevin Cluff
|David Earl
|02/20/2019
|-
|Greg Bell
|David Earl
|03/23/19
|-
|Paul Ocampo
|David Earl
|03/28/19
|-
|Fritz Sullivan
|David Earl
|03/31/19
|-
|Daniel Gulick
|David Earl
|12/10/2018
|-
|Alex Biardo
|David Earl
|05/07/2019
|-
|Brendan Byrne
|David Earl
|05/07/2019
|-
|Sam Vuchetich
|David Earl
|09/29/2019
|-
|Antina Lee
|David Earl
|09/29/2019
|-
|Rob German
|David Earl
|09/29/2019
|-
|Ryan Zoghlin
|David Earl
|01/25/2020
|-
|Ellen Lustig
|David Earl
|10/29/2020
|-}
If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.
If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.
!Service Type
!Service Type
!Notes
!Notes
|-
|4/16/2017
|Ryan Pierce
|Created new AutoDesk Fusion 360 Post Processor. Modified Vectric Post Processors.
|Created new Fusion 360 Post Processor. It includes the changes listed below for the Vectric Post Processors. For Vectric, modified the Post Processors so that if the spindle does not spin up, it gives the user a Retry/Cancel dialog box instead of Abort/Retry/Ignore where Ignore is identical to Retry. Also, these Post Processors broke the Preview mode in the ShopBot software because the preview mode did the real spindle check and it failed because, of course, the spindle wasn't running. The new version will ignore the spindle check in preview mode.
|-
|-
|11/8/2014
|11/8/2014
=== Lack of True E-Stop ===
=== Lack of True E-Stop ===
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.
As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.
=== Limit Switch Issues ===
=== Limit Switch Issues ===
== Resources ==
== Resources ==
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which include the change to check that the spindle actually started.
[[File:ShopBot PSOne Post Processors.zip]] - Post Processors for Vectric Aspire and VCarve Pro 8.0 which includes the change to check that the spindle actually started.
[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning
[[File:ShopBot_TC_PS1-NO-SPIN.zip]] - Post Processors for Vectric Aspire and VCarve Pro which include changes to explicitly *disable* spinning
[[File:ShopBot PSOne Fusion 360 Post Processor.zip]] - Post Processor for Autodesk Fusion 360 which includes the change to check that the spindle actually started.
[[Category:Fabrication]]
[[Category:Fabrication]]
[[Category:CNC]]
[[Category:CNC]]
[[Category:Future Things Bus Data Sources]]
[[Category:Future Things Bus Data Sources]]