Changes

Shopbot PRS CNC router (view source)

Revision as of 03:46, 30 October 2020

4,862 bytes added , 03:46, 30 October 2020

→‎List of Currently Authorized Users

Line 9: Line 9:

|doesitwork = yes

|contact = [[CNC|CNC Area Host]]

−

|where = ~~TBD~~

+

|where = Wood Shop

|value = $16000

|hostarea = CNC

}}

−

= ~~Shopbot~~ PRS #10108 96-48 =

+

= ShopBot PRS #10108 96-48 =

−

~~http://www.shopbottools.com/mProducts/prSstandard.htm~~

−

~~Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)~~

−

~~Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)~~

−

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable. Some people buy their own collets.

+

* [http://www.shopbottools.com/mProducts/prSstandard.htm OEM website and specs]

+

* Nominal Cutting Area 96"x 48"x 6" (2.44m x 1.22m x .15m)

+

* Total Movement Area 102" x 50" x 8" (2.59m x 1.27m x .20m)

+

* Max spindle speed: 18000 RPM

+

* Min spindle speed: 4100 RPM

+

The spindle uses ER25 collets. These eventually wear out, so check before using them. Collets are a durable expendable.

+

Some people buy their own collets. There are a number of suppliers of collets, nuts, and related accessories. [http://www.techniksusa.com/ Techniks] and [http://www.shars.com/ Shars] are both brands that have been recommended by experienced CNC users, although other brands may also be of equivalent price and quality:

+

* [http://www.shars.com/1-4-ultra-precision-5-micron-er25-collet Shars ER25 Collet Ultra Precision 5 Micron]

+

* [https://www.ebay.com/itm/TECHNIKS-1-4-SUPER-PRECISION-ER25-COLLET-0002-ACCURACY-CNC-CHUCK-MILL-/130701349603?hash=item1e6e6852e3 Techniks 1/4" Super Precision ER25 Collet .0002 Accuracy]

+

* [https://www.toolstoday.com/cnc-high-precision-spring-collets-for-er25-tool-holder.html?variantids=11644,0&keywords=CO-286 Amana CNC High Precision Spring Collets for ER25 Tool Holder]

+

* [https://www.amazon.com/HHIP-3900-5215-ER-25-Spring-Collet/dp/B01ABWS9IG/ HHIP 3900-5215 ER-25 Spring Collet, 1/4"]

+

* [https://www.amazon.com/Dorian-Tool-Alloy-Precision-Collet/dp/B00CB14HXW/ Dorian Tool ER25 Alloy Steel Ultra Precision Collet, 0.236" - 0.276" Hole Size]

+

=Status=

+

June 2020: Keyed switch replaced.

−

~~=Status history=~~

August 2017: Dust collection system out of commission.

Line 31: Line 44:

'''Authorization for this tool by authorized proctors only.''' This means you cannot get authorized by just anyone who is already authorized. You can only get authorized by a few people, the proctors listed below.

−

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask on the [https://groups.google.com/group/pumping-station-one/ Google Group].

+

Authorization sessions are scheduled roughly monthly. Check the [https://www.meetup.com/Pumping-Station-One/events/ Meetup calendar] for upcoming authorizations. If no ShopBot sessions are currently scheduled, ask the [[CNC Area Host]] or on the [https://groups.google.com/group/pumping-station-one/ Google Group].

Be aware that this authorization consists of two parts; the first session is a classroom session that will cover the software required and introduce you to the essential settings and chip-load calculation, and the second part, scheduled separately, is a hands-on class.

−

== ~~Authorized Proctors~~ ==

+

== Authorizers ==

{| class="wikitable" border="1"

|-

Line 62: Line 75:

|Matt Meshulam

|Andrew Camardella

+

|-

+

|David Earl

+

|Matt Meshulam

|-

|}

−

== How to Become an ~~Authorized Proctor~~ ==

+

== How to Become an Authorizer ==

−

Get an ok from the area host. Successfully run an authorization supervised by an ~~authorized proctor~~.

+

Get an ok from the area host. Successfully run an authorization supervised by an authorizer.

−

It's recommended that initial authorizations be limited to 2 or less.

+

It's recommended that initial authorizations be limited to 2 member participants or less.

= Documentation =

Line 94: Line 110:

[http://drshopbot.com/index.php?title=MaintainingConnection "Maintaining Connections"]

+

[[File:Shopbotmagnets.ai.zip]] - Template for the dust skirt and magnet placement.

== Tutorials ==

Line 105: Line 123:

[https://groups.google.com/d/msg/pumping-station-one/vUF3iKRQ9yc/_qNnLXzZ3QcJ Overview of Cut Load calcualtions for setting bit feed and speed rates]

+

Vertanux1: This user teaches at Elgin Community College and has very good tutorials and downloadable textbook on Autodesk Inventor (which applies to Fusion 360 as well: http://www.vertanux1.com/ and https://www.youtube.com/user/vertanux1?reload=9

+

Online chipload calculator: https://www.guhdo.com/chipload-calculator

+

Fusion 360 Videos

+

NYC CNC - Several videos that provide an overview of downloading software, preferences, and basic sketch terms and steps. https://www.nyccnc.com/fusion-360/

+

Lars Christensen - CAD/CAM instructor hired by Autodesk to produce their Fusion 360 videos. The Absolute Basics and #LarsLive series are worth watching. https://www.youtube.com/watch?v=A5bc9c3S12g&feature=youtu.be

+

Maker's Muse CAD for Newbies Series - Provides a detailed overview of sketch dimensions, constraints, revolving, sweeping, and lofting, among many other topics. https://www.youtube.com/playlist?list=PLTCCNNvHC8PC40tcEqaJcgUMb97LNkLIn

+

Krenov Coffee Table - A fantastic overview of the design of a coffee table from scratch. Lots of CAD best practices. https://www.youtube.com/watch?v=J22j8RfETjs&feature=youtu.be

+

Fusion 360 V12 Engine - A long playlist series on a complex topic that demonstrates how powerful real CAD software can be. https://www.youtube.com/playlist?list=PLQl9vsO6sGSlasKFP-CAgnDs324Z6IW8s

= Software Tool Chain =

Line 112: Line 147:

**Allows for 2D and 3D linework and toolpath creation

**Only available on the Shapeoko Computer

−

*Vectric V-Carve Makerspace Edition

+

*Vectric V-Carve Makerspace Edition Version 9.0 (earlier versions may not be supported here anymore)

** http://www.vectric.com/products/vcarve/trial.html

**Allows for 2D linework and toolpath creation

Line 133: Line 168:

*** After enabling cloud libraries in Fusion 360, you will be able to access your cloud post processor library by setting the Configuration Folder (Windows) or Source (Mac) to My Cloud Posts. Both of these dialog boxes are shown below. You will then be able to select the Cloud post you uploaded in the Post Configuration field (Windows) or the Post Processor field (Mac).

====Chip Load Calculation====

+

*[https://www.guhdo.com/chipload-calculator Chip Load Calculator by Guhdo]

*[http://www.pdsspindles.com/engineering-speeds Bit Parameter Overview by PDS Spindles]

−

*[~~http~~://www.monstertool.com/~~monster_tool_calculators~~.~~html~~ Monster Tools Chip Load Calculator]

+

*[https://www.monstertool.com/29/tech-data.htm Monster Tools Chip Load Calculator]

*[http://www.pdsspindles.com/admin/modules/page_editor/uploads/image/Chip%20load%20for%20common%20tool%20diameters%20(Inches).jpg Chip Load Chart by PDS Spindles]

*[https://groups.google.com/forum/#!searchin/pumping-station-one/makerspace$20edition/pumping-station-one/cTwfUHxESjU/7m_lI8UWCgAJ How to install Makerspace Version]

Line 253: Line 289:

== Use checklist ==

−

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/~~1L78Rr_T8vhV8XZLRReKIWYXAyOnS8CLfJmAxehVeThU~~/edit Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

+

PS1 is experimenting with the use of checklists to encourage the safe use and proper care of tools in the workspace. The latest version of the [[checklists]] for this tool is stored as a [https://docs.google.com/document/d/1zxrvQX0DXaLxaXkaKCKpZ-PAgnDak6ezKKBkdu_Fw1U/edit?usp=sharing Google Doc] that can be edited by anyone. If you make changes, update the effective date at the bottom of the document. Print a new copy, and replace the old one.

Physical checklists are necessarily constrained in length. Following is a more extensive pre-flight checklist:

Line 265: Line 301:

* Is the dust skirt set right so it does not get smashed.

* Is Z zero set to the work top?

−

* Is the touch plate and clip returned.

+

* Are the touch plate and clip returned?

−

* Is the material properly secured

+

* Is the material properly secured?

+

* Open the Shopbot spindle control dialog (Tools > Spindle RPM Control)

* Safety glasses, hearing protection on.

* Start the job with the E-Stop ready to hit.

Line 279: Line 316:

|Elizabeth Koprucki

|Danger Committee

+

|

|-

|Bart Dring

|Danger Committee

+

|

|-

|Ryan Pierce

|Danger Committee

+

|

|-

|Nathan Ellis

|Danger Committee

+

|

|-

|Michael Skilton

|Danger Committee

+

|

|-

|Arturo Duarte

|Bart

+

|

|-

|Derek Bever

|Bart

+

|

|-

|Everett

|Bart

+

|

|-

|Vincent Colombo

|Bart

+

|

|-

|[[User:justin|Justin T. Conroy]]

|Bart

+

|

|-

|Hugh Sato

|Bart

+

|

|-

|Sergey Nekrasov

|Bart

+

|

|-

|Valerie Moore

|Bart

+

|

|-

|Patrick Schless

|Bart

+

|

|-

|Tom Forajter

|Bart

+

|

|-

|Todd Allen

|Michael Skilton

+

|

|-

|[[User:RogerMoore|Roger Moore]]

|Bart

+

|

|-

|Tim Saylor

|Bart

+

|

|-

|Hef

|Bart

+

|

|-

|Jeff McBride

|Bart

+

|

|-

| Maxwell ?

| Michael Skilton

+

|

|-

|Samuel Swope

|Michael Skilton

+

|

|-

| Khoi Nguyen

|Michael Skilton

+

|

|-

|Brian Chojnowski

|Michael Skilton

+

|

|-

|Josh Cooper

|Bart

+

|

|-

|Andrew Camardella

|Bart

+

|

|-

|Adam Glick

|Bart

+

|

|-

|Yehuda Braun

|Bart

+

|

|-

| Jeff Kantarek

| Michael Sklton

+

|

|-

| Justin Miles

|Michael Skilton

+

|

|-

|Will Garza

|Michael Skilton

+

|

|-

|Clarence Risher

|Michael Skilton

+

|

|-

|[[User:ericbeau|Eric Beauchamp]]

|Michael Skilton

+

|

|-

|[[User:Jason|Jason]]

|Michael Skilton

+

|

|-

|Eric Stein

|Bart

+

|

|-

|Colin Parsons

|Bart

+

|

|-

|David Ditzler

|Bart

+

|

|-

|Ray Doeksen

|Bart Dring

+

|

|-

|Ron Bean

|Khoi Nguyen & Michael Skilton

+

|

|-

| Thomas Wright

−

|Khoi Nguyen & Michael Skilton

+

|Khoi Nguyen & Michael Skilton

+

|

|-

|David Morton

|Bart Dring

+

|

|-

|Ron Olson

|Bart Dring

+

|

|-

|Kyle Bieneman

|Bart Dring

+

|

|-

|[[User:amishhammer|Tom Judge]]

|Michael Skilton

+

|

|-

|Bryan Gleason

|Michael Skilton

+

|

|-

|Dave Schact

|Ryan Pierce

+

|

|-

|Chris Agocs

|Andrew Camardella

+

|

|-

|[[user:kuroishi | Doorman Dave ]]

|Andrew Camardella

+

|

|-

|Alec Weege

|Andrew Camardella

+

|

|-

|Sam Reicks

|Andrew Camardella

+

|

|-

|Touly Phiachantharath

|Andrew Camardella

+

|

|-

|Lucas Goossen

|Andrew Camardella

+

|

|-

|[[user:Tina|Tina C]]

|Andrew Camardella

+

|

|-

|Ryan Neuman

|Andrew Camardella

+

|

|-

|Dan Loeser

|Andrew Camardella

+

|

|-

|Ben Bogler

|Andrew Camardella

+

|

|-

|Erin Banwell

|Ryan Pierce

+

|

|-

|Brad Rios

|Ryan Pierce

+

|

|-

|Aaron Carlock

−

|Andrew Camardella

+

|Andrew Camardella

+

|

|-

|James Villalpando

−

|Andrew Camardella

+

|Andrew Camardella

+

|

|-

|Connor Jansen

−

|Andrew Camardella

+

|Andrew Camardella

+

|

|-

|Tait Leswing

|Bart

+

|

|-

|Raj Perera

|Khoi Nguyen

+

|

|-

|Keith Hultman

|Andrew Camardella

+

|

|-

|David Srebro

|Andrew Camardella

+

|

|-

|[[user:Wessing | Erik Wessing ]]

|Andrew Camardella

+

|

|-

|Leeswann Bolden

|Andrew Camardella

+

|

|-

|Josh Myers

|Andrew Camardella

+

|

|-

|Kurt Ziegel

|Andrew Camardella

+

|

|-

|Glenn Powers

|Andrew Camardella

+

|

|-

|[[User:mqudsi|Mahmoud Al-Qudsi]]

|Andrew Camardella

+

|

|-

|Casey Olson

|Khoi

+

|

|-

|Mike Jones

|Andrew Camardella

+

|

|-

|Aaron Feigen

|Andrew Camardella

+

|

|-

|Jim Baker

|Andrew Camardella

+

|

|-

|Eric Reusche

|Khoi Nguyen

+

|

|-

|Ralph Brendler

|Andrew Camardella

+

|

|-

|John McDonald

|Andrew Camardella

+

|

|-

|Alex Al-Hamdan

|Andrew Camardella

+

|

|-

|Eugene Liokumovich

|Andrew Camardella

+

|

|-

|Randal Cox

|Andrew Camardella

+

|

|-

|Simon Pyle

|Andrew Camardella

+

|

|-

|Jean Michel Crettaz

|Andrew Camardella

+

|

|-

|Brian Zable

|Andrew Camardella

+

|

|-

|Daylan Dufelmeier

|Andrew Camardella

+

|

|-

|Steve Kruse

|Matt Meshulam

+

|

|-

|Mike Mandrea

|Andrew Camardella

+

|

|-

|Jeff Zelnio

|Andrew Camardella

+

|

|-

|Aaron Stoddart

|Matt Meshulam

+

|

|-

|Koun Park

|Matt Meshulam

+

|

|-

|Dan Baltudis

|Matt Meshulam

+

|

|-

|Curtiss Cooke

|Matt Meshulam

+

|

|-

|Jeannine Chuchan

|Matt Meshulam

+

|

|-

|Brennan Koziarz

|Matt Meshulam

+

|

|-

|Brandon Love

|Matt Meshulam

+

|

|-

|Mike Vitale

|Matt Meshulam

+

|

|-

|Emma Purola

|Matt Meshulam

+

|

|-

|Chris Kohl

|Matt Meshulam

+

|

|-

|Daniel Sojka

|Matt Meshulam

+

|

|-

|Naguib Azab

|Matt Meshulam

+

|

|-

|Mark Zumwalt

|Matt Meshulam

+

|

|-

|Joseph Juhnke

|Andrew Camardella

+

|

|-

|Alex Berkowitz

|Andrew Camardella

+

|

|-

|Andy Muhic

|Matt Meshulam

+

|

|-

|Adam Stein

|Matt Meshulam

+

|

|-

|John Farmer

|Matt Meshulam

+

|

|-

|Joshua Havenga

|Matt Meshulam

+

|

|-

|[[user:mct|McTavish McArdle]]

|Matt Meshulam

+

|

|-

|Frank Bowles

|Matt Meshulam

+

|

|-

|Joe Iklov

|Matt Meshulam

+

|

|-

|Matthew Quigley

|Matt Meshulam

+

|

|-

|Derwin Umali

|Andrew Camardella

+

|

|-

|Doug Mahoney

|Matt Meshulam

+

|

|-

|Rob Robinson

|Matt Meshulam

+

|

|-

|Dan Sloboda

|Matt Meshulam

+

|

|-

|Jacob Collins

|Matt Meshulam

+

|

|-

|Donald Wells

|Matt Meshulam

+

|

|-

|[[user:jim|Jim Brink]]

|Matt Meshulam

+

|

|-

|[[user:mkeith|Matt Keith]]

|Matt Meshulam

+

|

|-

|[[user:vmorris|Victoria Morris]]

|Matt Meshulam

+

|

|-

|[[user:bobsabayesian|Bob Loos]]

|Matt Meshulam

+

|

|-

|[[user:muthpete|Peter Muth]]

|Matt Meshulam

+

|

|-

|[[user:guijemont|Guillaume Emont]]

|Matt Meshulam

+

|

|-

|[[user:erikthefunk|Erik Funkhouser]]

|Matt Meshulam

+

|

|-

|[[user:mrashes|Max Rashes]]

|Matt Meshulam

+

|

|-

|[[user:panchan99|Juan Ramos]]

|Matt Meshulam

+

|

|-

|[[user:Justjoe|Joe Dowling]]

|Matt Meshulam

+

|

|-

|[[user:smash|Ashley Matrisciano]]

|Matt Meshulam

+

|

|-

|Ryan Kapp

|Matt Meshulam

+

|

|-

|Idris Raja

|Matt Meshulam

+

|

|-

|[[user:Dannyblanchard|Danny Blanchard]]

|Matt Meshulam

+

|

|-

|Aaron Mintz

|Matt Meshulam

+

|

|-

|[[user:ianstubbs|Ian Stubbs]]

|Matt Meshulam

+

|

|-

−

|[[user:skynaya|~~Skylar~~ Nova]]

+

|[[user:skynaya|Sky Nova]]

|Matt Meshulam

+

|

|-

|Chris Ruhland

|Matt Meshulam

+

|

|-

|[[user:Jaypee|Jay Pee]]

|Matt Meshulam

+

|

|-

|[[user:Ryanmafi|Ryan Fiebing]]

|Matt Meshulam

+

|

|-

|[[user:sblaszak|Shawn Blaszak]]

|Matt Meshulam

+

|

|-

|[[user:tonyiacullo|Tony Iacullo]]

−

|Matt Meshulam

+

|Matt Meshulam

+

|

|-

|Mark Haughey

|Matt Meshulam

+

|

|-

|Chris Iacullo

|Matt Meshulam

+

|

|-

|Ian Monroe

|Matt Meshulam

+

|

|-

|Ashish Jasani

|Matt Meshulam

+

|

|-

|Kurt Gilman

|Matt Meshulam

+

|

|-

|Abel Greenwald

|Matt Meshulam

+

|

|-

|Vaidotas (Vai) Staugaitis

|Matt Meshulam

+

|

|-

|Leo Battikhi

|Matt Meshulam

+

|

|-

|Matt Schaid

|Matt Meshulam

+

|

|-

|Jamie Vollmer

|Matt Meshulam

+

|

|-

|Bhairavi Warke

|Matt Meshulam

+

|

|-

|Denis Kuznetsov

|Matt Meshulam

+

|

|-

|Brian Carstensen

|Matt Meshulam

+

|

|-

|Rob Dumas

|Matt Meshulam

+

|

|-

|Mark Weiser

|Matt Meshulam

+

|

|-

|Tom Burtonwood

|Matt Meshulam

+

|

|-

|Steve Madonna

|Matt Meshulam

+

|

|-

|Jason Araujo

|Matt Meshulam

+

|

|-

|Bruce Alan Mace

|Matt Meshulam

+

|

|-

|Molly Adamski

|Matt Meshulam

+

|

|-

|Jeremy Shaw

|Matt Meshulam

+

|

|-

|Sam Chen

|Matt Meshulam

+

|

|-

|John McBride

|Matt Meshulam

+

|

|-

|Adomas Tautkus

|Matt Meshulam

+

|

|-

|Tim Buckley

|Matt Meshulam

+

|

|-

|Martina Josimovska

|Matt Meshulam

+

|

|-

|James Jacobs

|Matt Meshulam

+

|

|-

|George Shaw

|Matt Meshulam

+

|

|-

|David Earl

|Matt Meshulam

+

|

|-

|[[User:pedrosk| Eduard Breuer]]

|Matt Meshulam

+

|

|-|-

|Matthew Kim

|Matt Meshulam

+

|

|-

|Corey Peoples

|Matt Meshulam

+

|

|-

|Paul Graham

|Matt Meshulam

+

|

|-

|Matt Grunstad

|Matt Meshulam

+

|

|-

|Rolf Scheidt

|Matt Meshulam

+

|

|-

|Arjun Sharma

|Matt Meshulam

+

|

|-

|Chris Laurent

|Matt Meshulam

+

|

|-

|[[User:dwlocks|Dan Locks]]

|Matt Meshulam

+

|

|-

|Zack Sasnow

|Matt Meshulam

+

|

|-

|Ben Stringer

|Matt Meshulam

+

|

|-

|[[User:Ekaj|Jacob Snyder]]

Line 821: Line 1,037:

|Matt Meshulam

|9/13/17

−

|}

+

|-

−

+

| Sam Gates

+

|Matt Meshulam

+

|10/01/17

+

|-

+

| Tommy TBones Cramer

+

|Matt Meshulam

+

|09/24/17

+

|-

+

| tee

+

|Matt Meshulam

+

|10/26/17

+

|-

+

|[[User:wittnl|Nathan Witt]]

+

|Matt Meshulam

+

|2017-12-09

+

|-

+

|[[User:GalaxyCascade|Steve Griegoliet]]

+

|Matt Meshulam

+

|12/09/17

+

|-

+

| Chinbayar Davaatseren

+

| Matt Meshulam

+

| 12/09/17

+

|-

+

|Theo T

+

|David Earl

+

|1/20/18

+

|-

+

|[[User:Frenchy|Jeremie Davis]]

+

|David Earl

+

|1/21/18

+

|-

+

|Armani Barron

+

|Matt Meshulam

+

|9/16/17

+

|-

+

|Scott Fullman

+

|David Earl

+

|02/24/18

+

|-

+

|Michael Donovan

+

|David Earl

+

|03/04/2018

+

|-

+

|Damon Carrvesco

+

|David Earl

+

|03/26/2018

+

|-

+

|Ryan Kelly

+

|David Earl

+

|03/26/2018

+

|-

+

|Will Coffin

+

|David Earl

+

|03/26/2018

+

|-

+

|Shabab Mustafa

+

|David Earl

+

|03/26/2018

+

|-

+

|Bruce Mace

+

|David Earl

+

|03/26/2018

+

|-

+

|Shahnawas Khokhar

+

|David Earl

+

|03/26/2018

+

|-

+

|Seth Cothron

+

|David Earl

+

|04/22/2018

+

|-

+

|Matthew Currey

+

|David Earl

+

|04/22/2018

+

|-

+

|Adam Hall

+

|David Earl

+

|04/29/2018

+

|-

+

|Kevin Huemann

+

|David Earl

+

|04/29/2018

+

|-

+

|Donzell Gordon

+

|David Earl

+

|04/28/2018

+

|-

+

|Nelson Reyes

+

|David Earl

+

|05/26/2018

+

|-

+

|David DesRoberts

+

|David Earl

+

|05/26/2018

+

|-

+

|Brendan Fortune

+

|David Earl

+

|06/02/2018

+

|-

+

|Chris Albert

+

|David Earl

+

|06/17/2018

+

|-

+

|Nate Myren

+

|David Earl

+

|06/23/2018

+

|-

+

|Eli Scholssberg

+

|David Earl

+

|06/23/2018

+

|-

+

|Szymon Mirek

+

|David Earl

+

|06/24/2018

+

|-

+

|Dan Willmott

+

|David Earl

+

|06/24/2018

+

|-

+

|Mark Treiber

+

|David Earl

+

|10/28/2018

+

|-

+

|Charlie Kepner

+

|David Earl

+

|02/20/2019

+

|-

+

|Kevin Cluff

+

|David Earl

+

|02/20/2019

+

|-

+

|Greg Bell

+

|David Earl

+

|03/23/19

+

|-

+

|Paul Ocampo

+

|David Earl

+

|03/28/19

+

|-

+

|Fritz Sullivan

+

|David Earl

+

|03/31/19

+

|-

+

|Daniel Gulick

+

|David Earl

+

|12/10/2018

+

|-

+

|Alex Biardo

+

|David Earl

+

|05/07/2019

+

|-

+

|Brendan Byrne

+

|David Earl

+

|05/07/2019

+

|-

+

|Sam Vuchetich

+

|David Earl

+

|09/29/2019

+

|-

+

|Antina Lee

+

|David Earl

+

|09/29/2019

+

|-

+

|Rob German

+

|David Earl

+

|09/29/2019

+

|-

+

|Ryan Zoghlin

+

|David Earl

+

|01/25/2020

+

|-

+

|Ellen Lustig

+

|David Earl

+

|10/29/2020

+

|-}

If you have been authorized but cannot log in, request to be added to the "ShopBot Authorized" Samba group (send an email to info (at) pumpingstationone.org with your username and the name of the person who certified you) so that your login works. If you don't have a log-in on https://members.pumpingstationone.org/ you will have issues here - sign up on that site first if you haven't already.

Line 860: Line 1,251:

=== Lack of True E-Stop ===

As shipped, the ShopBot PRS does not support an Emergency Stop. This could be hacked, but it runs the risk of damaging the machine if engaged in a non-emergency situation. Suggested solution: Installing a 10A double pole 24V coil DIN mount relay, and powering the coil via the 24V supply through a normally closed E-Stop button. One pole will disconnect the 63V stepper motor current. One pole will break the control signal that enables the VFD and will cause the VFD to brake to a stop.

−

~~=== Automatic Dust Collection ===~~

−

~~The ShopBot has +5V TTL outputs that could be used to trigger automatic dust collection (when the spindle goes live) and/or a warning light (when the gantry is enabled to move.)~~

=== Limit Switch Issues ===

Ellen

4

edits

Changes

Shopbot PRS CNC router (view source)

Revision as of 03:46, 30 October 2020

Navigation menu

Search