Difference between revisions of "T-962 Reflow Oven"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
Step 2 of the hack was done with a [http://digistump.com/products/1 Digispark USB Development Board]. You can hear the fan pulse when the heating elements are on. | Step 2 of the hack was done with a [http://digistump.com/products/1 Digispark USB Development Board]. You can hear the fan pulse when the heating elements are on. | ||
| + | |||
| + | Be sure to read the manual before using it. [[File:T-962_INFRARED_IC_HEATER_User_Manual.pdf]] | ||
Revision as of 03:18, 24 February 2014
 | |
| Owner/Loaner | Rob Riggs |
|---|---|
| Serial Number | F1306748 |
| Make/Model | T-962 Reflow Oven |
| Arrival Date | 2014 |
| Usability | yes |
| Contact | Rob Riggs |
| Where | Electric Avenue |
| Authorization Needed | no |
| Hackable | no |
| Estimated Value | about $250 |
| Host Area | {{{hostarea}}} |
This is an 800W 180×235mm infrared SMD reflow oven. It has a number of reflow profiles available and can be programmed with a custom profile. Profile 1 is a fairly standard profile which works pretty well for lead-free solder paste.
The oven has been modified with the hacks documented by this Instructable.
Step 2 of the hack was done with a Digispark USB Development Board. You can hear the fan pulse when the heating elements are on.
Be sure to read the manual before using it. File:T-962 INFRARED IC HEATER User Manual.pdf