Difference between revisions of "Talk:BOSS LS-3655 150w Laser Engraver"
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
{| class="wikitable" border="1" | {| class="wikitable" border="1" | ||
! Material | ! Material | ||
| + | ! Thickness | ||
! Mode | ! Mode | ||
! Min Power | ! Min Power | ||
| Line 19: | Line 20: | ||
! Passes | ! Passes | ||
! Air Assist | ! Air Assist | ||
| + | ! Notes | ||
| + | ! Tested By | ||
|- | |- | ||
|Sample Material | |Sample Material | ||
| + | |1/4 inch | ||
|Scan | |Scan | ||
|0% | |0% | ||
| Line 27: | Line 31: | ||
|1 | |1 | ||
|Yes | |Yes | ||
| + | |Insert informative notes here | ||
| + | |Insert your signature | ||
|- | |- | ||
|x | |x | ||
| Line 35: | Line 41: | ||
|x | |x | ||
|x | |x | ||
| + | |x | ||
| + | |x | ||
| + | |- | ||
| + | |Acrylic | ||
| + | |1/4th inch | ||
| + | |Cut | ||
| + | |29% | ||
| + | |29% | ||
| + | |12mm | ||
| + | |2 | ||
| + | |Yes | ||
| + | |Required two cuts, increase power or slow speed | ||
| + | |[[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 09:19, 5 March 2017 (CST) | ||
|-} | |-} | ||
Revision as of 15:19, 5 March 2017
Questions
Q: Test cuts accumulating ... is there a place where best practices notes are being collected? - Ray
A: You can post best practice notes here and then we can go over them as a group Skynaya (talk) 09:03, 5 March 2017 (CST)
Warnings
It's really easy to catch things on fire! This is a given. Skynaya (talk) 09:09, 5 March 2017 (CST)
Best Practices
| Material | Thickness | Mode | Min Power | Max Power | Speed MM/s | Passes | Air Assist | Notes | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| Sample Material | 1/4 inch | Scan | 0% | 0% | 5mm | 1 | Yes | Insert informative notes here | Insert your signature |
| x | x | x | x | x | x | x | x | x | |
| Acrylic | 1/4th inch | Cut | 29% | 29% | 12mm | 2 | Yes | Required two cuts, increase power or slow speed | Skynaya (talk) 09:19, 5 March 2017 (CST) |