Difference between revisions of "Talk:BOSS LS-3655 150w Laser Engraver"

Revision as of 22:03, 16 March 2017

Q: Test cuts accumulating ... is there a place where best practices notes are being collected? - Ray

A: You can post best practice notes here and then we can go over them as a group Skynaya (talk) 09:03, 5 March 2017 (CST)

It's really easy to catch things on fire! This is a given. Skynaya (talk) 09:09, 5 March 2017 (CST)

Material	Thickness	Mode	Min Power	Max Power	Speed MM/s	Passes	Air Assist	Notes	Tested By
Sample Material	1/4 inch	Scan	0%	0%	5mm	1	Yes	Insert informative notes here	Insert your signature
x	x	x	x	x	x	x	x	x	x
Acrylic	1/4th inch	Cut	29%	29%	12mm	2	Yes	Required two cuts, increase power or slow speed	Skynaya (talk) 09:19, 5 March 2017 (CST)
Acrylic	1/4th inch	Scan	29%	29%	300mm	1	Yes	Fairly good engrave, lots of acrylic dust. With the power of this laser, might be better to have protective film on for engraving and cutting.	Skynaya (talk) 09:21, 5 March 2017 (CST)

@@ Line 8: / Line 8: @@
 It's really easy to catch things on fire! This is a given. [[User:Skynaya|Skynaya]] ([[User talk:Skynaya|talk]]) 09:09, 5 March 2017 (CST)
+== References ==
+Found this from another makerspace - http://wiki.makeitlabs.com/training/laser/laser-projects
+Copied to my Google Account for the time being in case it goes down - https://docs.google.com/spreadsheets/d/1m4y6XDf3oE88GSfsBbwxdoSqlNOYF5DG-lZ8CJbGDfM/edit?usp=sharing
 == Best Practices ==