Taz 3 OctoPrint Server

From Pumping Station: One Wiki
Revision as of 22:34, 4 October 2018 by Rdoeksen (talk | contribs) (Current Status)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Taz 3 OctoPrint Server
Taz 3 OctoPrint Server.jpeg
Owner/Loaner PS:One
Serial Number N/A
Make/Model Raspberry Pi 3
Arrival Date April 2017
Usability no
Contact CNC Area Host
Where CNC 1st Floor
Authorization Needed yes
Hackable no
Estimated Value $50
Host Area CNC

Taz 3 OctoPrint Server Area: CNC https://wiki.pumpingstationone.org/Taz_3_OctoPrint_Server

IP Address

Current Status

None of the Octoprint servers are working as of 10/4/2018

[Online and ready to slice. Compiling information to include in new authorization procedure.]


Authorization for this device is determined by authorization for the Lulzbot Taz3.


Please see Lulzbot Taz3#Taz 3 OctoPrint Server

Recommended Non-Stock Plugins

  • Slicer (1.2.5)
    • A full-blown GUI-based slicer. Rotate and scale model; set layer height and other critical parameters.

See Also


Updated to v 1.3.8 on 06/29/18