Technics Hummer V Sputter Coater
 | This tool is currently broken, please contact the area host for more information. |
| Owner/Loaner | PS:One |
|---|---|
| Serial Number | HUV 62735 |
| Make/Model | Hummer V |
| Arrival Date | 3/23/2013 |
| Usability | WORKING |
| Contact | Ryan Pierce |
| Where | Across from Woodshop |
| Authorization Needed | yes |
| Hackable | NO |
| Estimated Value | $5,000.00 |
| Host Area | {{{hostarea}}} |
Configuration
- Standard sputter coater
- Carbon arc attachment for carbon deposition
Status
- Requires argon for operation. Preferably high purity argon.
- Power cord is scary and needs to be replaced.
- Gas flow rate meter has a small leak, needs a new gasket.
- Changing the vacuum oil would be a good idea.
- Initial tests with welding argon showed that it worked and was sputtering metal, however maintaining a plasma seemed to use a lot of current. The former operator suggested pulsing it to burn any oxygen in the chamber out. The manufacturer suggested a short that could be remedied by a good cleaning, which was performed.
List of Currently Certified Users
| Qualified Member | Trained By |
|---|---|
| Ryan Pierce | Ryan Pierce |
| Steve Finkelman | Steve Finkelman |
Documentation
Manual scans for the sputter coater are available, as is a manual for a similar but not identical model of the carbon arc deposition system. A location to drop them is needed. The m
The manufacturer was purchased by Anatech USA and they still support this product.
Maintenance Log
| Date | Maintainer | Description |
|---|---|---|
| 4/?/2013 | Steve Finkelman | Full cleaning of chamber. |