Difference between revisions of "User:Andrewvaughan/SNES-in-a-Controller"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
− | + | {{Template:Tutorial | |
+ | | name=SNES-in-a-Controller | ||
+ | | creator = [[User:Andrewvaughan|Andrew Vaughan]] | ||
+ | | version = 1.0 | ||
+ | | date = April 26, 2017 | ||
+ | | est_time = 30 Minutes | ||
+ | | est_cost = $33-$43 | ||
+ | | in_development = YES | ||
+ | }} | ||
+ | |||
+ | With the size of gaming devices and development boards becoming smaller and smaller, it was only a matter of time before someone put a console inside the controller. Using a [[Raspberry Pi]] Zero, a standard USB SNES Controller, and a few extra parts, you can make yourself a portable, rechargeable gaming emulator self-contained in its own controller. | ||
+ | |||
+ | == What You'll Need == | ||
+ | |||
+ | === Parts === | ||
+ | |||
+ | {| class="wikitable" | ||
+ | ! Part | ||
+ | ! Cost | ||
+ | |- | ||
+ | | [https://www.raspberrypi.org/products/pi-zero-w/ Raspberry Pi Zero (or Raspberry Pi Zero W)] | ||
+ | | $10 | ||
+ | |- | ||
+ | | [https://www.amazon.com/Generic-Super-Nintendo-Classic-Controller/dp/B01M1K6HKT/ USB SNES Controller] | ||
+ | | $6.90 | ||
+ | |- | ||
+ | | [https://www.amazon.com/DTOL-HDMI-Micro-Adapter/dp/B0046S54GC/ MicroHDMI to HDMI Adapter] | ||
+ | | $1.40 | ||
+ | |- | ||
+ | | [https://www.adafruit.com/product/328 2500mAH 3.7v Lithium Ion Polymer Battery with 2-Pin JST-PH Connector] | ||
+ | | $14.95 | ||
+ | |- | ||
+ | | [https://www.adafruit.com/product/1903 500mA Power Boost Circuit] | ||
+ | | $9.95 | ||
+ | |- | ||
+ | | MicroUSB Power Cable, HDMI Cable, and Television/Monitor | ||
+ | | N/A | ||
+ | |- | ||
+ | ! Total | ||
+ | ! $43.20 | ||
+ | |} | ||
+ | |||
+ | === Tools === | ||
+ | |||
+ | TK | ||
+ | |||
+ | == Steps == | ||
+ | |||
+ | TK | ||
+ | |||
+ | == Tips == | ||
+ | |||
+ | * Whenever using Lithium Ion Polymer batteries, pay close attention to maximum charge rates and amperages. Even with protection circuits in-place, these should always be treated with care. | ||
+ | * Remember that most Lithium Ion Polymer batteries ''do '''not''''' have thermal protection circuitry built in. | ||
+ | * To reduce cost, an original Raspberry Pi Zero can be used, but note that, due to lack of network connectivity (the USB data ports are fully in-use), all administration of the platform (including game uploading) must be done on a separate system | ||
+ | * To further reduce cost, the size of the battery can be reduced to [https://www.adafruit.com/product/258 1200mAH], or less - but playtime will be drastically reduced between charges. | ||
+ | |||
+ | |||
+ | {{Template:TutorialVariations}} | ||
[[Category:Projects]] | [[Category:Projects]] | ||
[[Category:Tutorials]] | [[Category:Tutorials]] |
Revision as of 22:11, 26 April 2017
This project is currently in development and should not be currently considered complete. Contact the project owner for more information. |
Creator | Andrew Vaughan |
---|---|
Version | 1.0 |
Date | April 26, 2017 |
Estimated Time | 30 Minutes |
Estimated Cost | $33-$43 |
With the size of gaming devices and development boards becoming smaller and smaller, it was only a matter of time before someone put a console inside the controller. Using a Raspberry Pi Zero, a standard USB SNES Controller, and a few extra parts, you can make yourself a portable, rechargeable gaming emulator self-contained in its own controller.
What You'll Need
Parts
Part | Cost |
---|---|
Raspberry Pi Zero (or Raspberry Pi Zero W) | $10 |
USB SNES Controller | $6.90 |
MicroHDMI to HDMI Adapter | $1.40 |
2500mAH 3.7v Lithium Ion Polymer Battery with 2-Pin JST-PH Connector | $14.95 |
500mA Power Boost Circuit | $9.95 |
MicroUSB Power Cable, HDMI Cable, and Television/Monitor | N/A |
Total | $43.20 |
Tools
TK
Steps
TK
Tips
- Whenever using Lithium Ion Polymer batteries, pay close attention to maximum charge rates and amperages. Even with protection circuits in-place, these should always be treated with care.
- Remember that most Lithium Ion Polymer batteries do not have thermal protection circuitry built in.
- To reduce cost, an original Raspberry Pi Zero can be used, but note that, due to lack of network connectivity (the USB data ports are fully in-use), all administration of the platform (including game uploading) must be done on a separate system
- To further reduce cost, the size of the battery can be reduced to 1200mAH, or less - but playtime will be drastically reduced between charges.