Difference between revisions of "Swag Heavy Duty Break"
Jump to navigation
Jump to search
Amishhammer (talk | contribs) |
m |
||
(2 intermediate revisions by one other user not shown) | |||
Line 14: | Line 14: | ||
This tool is for use in the central machinery 20 ton H-Frame press. | This tool is for use in the central machinery 20 ton H-Frame press. | ||
− | There are 2 sets of dies, the standard dies and a set of | + | There are 2 sets of dies, the standard dies and a set of gooseneck dies. |
+ | |||
+ | '''Max. Bending Capacity 1/2" plate''' | ||
+ | |||
+ | Max Bending Radius (deg.) 110 | ||
+ | |||
+ | Max Bending Width 19" | ||
+ | |||
+ | |||
+ | It Is capable of bending mild steel in the following width and thickness. | ||
+ | |||
+ | * 19" = Full bending width of the bottom die on anything 3/16" or thinner. | ||
+ | * 15" in 1/4" | ||
+ | * 13" in 5/16" | ||
+ | * 11" in 3/8" | ||
+ | * 6" in 1/2" | ||
== Gooseneck dies == | == Gooseneck dies == | ||
Line 38: | Line 53: | ||
|Area Host | |Area Host | ||
|} | |} | ||
+ | |||
+ | [[Category:Loaned Equipment]] |
Latest revision as of 16:50, 16 August 2017
File:None | |
Owner/Loaner | Tom Judge |
---|---|
Serial Number | N/A |
Make/Model | SWAG Offroad HD Break |
Arrival Date | Yes |
Usability | yes |
Contact | Tom Judge |
Where | Cold Metals Area |
Authorization Needed | yes |
Hackable | no |
Estimated Value | $400 |
Host Area | {{{hostarea}}} |
This tool is for use in the central machinery 20 ton H-Frame press.
There are 2 sets of dies, the standard dies and a set of gooseneck dies.
Max. Bending Capacity 1/2" plate
Max Bending Radius (deg.) 110
Max Bending Width 19"
It Is capable of bending mild steel in the following width and thickness.
- 19" = Full bending width of the bottom die on anything 3/16" or thinner.
- 15" in 1/4"
- 13" in 5/16"
- 11" in 3/8"
- 6" in 1/2"
Gooseneck dies
These dies are for bending shallow pans or forming complex "U" bends, please use the regular dies for all standard bends.
THE MAXIMUM THICKNESS OF MATERIAL TO BE BENT WITH THE GOOSENECK DIES IS 1/4"
Using the gooseneck dies you will be able to bend U shaped pieces that have maximum leg "A" that is 2.0" long and a minimum width "B" of 2.0" wide.
Authorized Users
Qualified Member | Trained By |
---|---|
Tom Judge | Owner |
Dean Anderson | Area Host |