297
edits
Changes
From Pumping Station One
UniFi Security Gateway Pro (view source)
Revision as of 19:26, 1 January 2018
, 19:26, 1 January 2018→Adpoting a USG Pro into an existing network
4. In the SSH session, run the following (Since this is a USG Pro, eth1 has been replaced with eth0 per Ubiquiti instructions):
4. In the SSH session, run the following (Since this is a USG Pro, eth1 has been replaced with eth0 per Ubiquiti instructions):
configure
* configure
set interfaces ethernet eth0 address 10.100.0.1/20
* set interfaces ethernet eth0 address 10.100.0.1/20
delete interfaces ethernet eth0 address 192.168.1.1/24
* delete interfaces ethernet eth0 address 192.168.1.1/24
commit
* commit
Now the USG’s LAN IP is 10.100.0.1/20. The SSH session will drop.
Now the USG’s LAN IP is 10.100.0.1/20. The SSH session will drop.
=== Controller Configuration ===
=== Controller Configuration ===
