278
edits
Changes
From Pumping Station One
BiosensorArray - Data Logging (view source)
Revision as of 21:01, 30 March 2011
, 21:01, 30 March 2011Created page with '== Onboard Storage == Biosensor data stream should be in a non-volitile manner on the data aggregator board attached to the body. Ideally, the biosensor array will stream data …'
== Onboard Storage ==
Biosensor data stream should be in a non-volitile manner on the data aggregator board attached to the body. Ideally, the biosensor array will stream data wirelessly to a smart phone or computer, but this should not be required to ensure operational flexibility. Therefore, a moderate amount of on board storage is required.
=== EEPROM ===
* Pro's:
** Cheaper than flash memory
** Simpler to interface & manage
*** Drew believes but needs to research
* Con's:
** Much smaller size that flash memory
** Not removable
* Implementations:
=== Flash Memory (SD, microSD, etc) ===
* Pro's:
** High capacity
** Removable
* Con's:
** Higher cost than EEPROM
** More complex to interface & mananger
*** Drew believes but needs to research
* Implementations:
Biosensor data stream should be in a non-volitile manner on the data aggregator board attached to the body. Ideally, the biosensor array will stream data wirelessly to a smart phone or computer, but this should not be required to ensure operational flexibility. Therefore, a moderate amount of on board storage is required.
=== EEPROM ===
* Pro's:
** Cheaper than flash memory
** Simpler to interface & manage
*** Drew believes but needs to research
* Con's:
** Much smaller size that flash memory
** Not removable
* Implementations:
=== Flash Memory (SD, microSD, etc) ===
* Pro's:
** High capacity
** Removable
* Con's:
** Higher cost than EEPROM
** More complex to interface & mananger
*** Drew believes but needs to research
* Implementations:
