[https://www.simplify3d.com/support/print-quality-troubleshooting/#gaps-between-infill-and-outline Common problems with identifying images.]
=== Moisture in Filament ===
=== Moisture in Filament ===
+
Our filament mostly isn't stored in an airtight container. This means that the filament will absorb water over time. Hydrolysis is when a water molecule breaks a plastic polymer chain. The water can also vaporize and create air bubbles and voids. This affects print quality in every aspect:
+
# Loss of strength (material becomes brittle)
+
# Poor finish
+
# Poor adhesion between layers
+
# Poor adhesion to the bed.
+
# Failed prints.
+
+
=== Filament will not load ===
+
Filament intake tension may be insufficient. This is typically adjusted via a long bolt inside of a spring.
+
+
=== Print head movement stalls during calibration ===
+
Something may be physically keeping bed from traveling to limit. Limit switches may not be operating correctly.